Panasonic AW-HS50 System Camera and Switcher Product Lineup Catalog - Page 48
Remote Camera System - Specifications, nsions
View all Panasonic AW-HS50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Remote Camera System - Specifications Dimensions AW-HE40SW/SK/HW/HK General Power Requirements DC 12 V (Supplied AC adaptor) DC 42 - 57 V (PoE+ power supply) 1.2 A (Supplied AC adaptor) 0.4 A (PoE+ power supply) Ambient Operating Temperature 0 °C to 40 °C (32 °F to 104 °F) Allowable Humidity Ranges 20 % to 90 % (no condensation) Storage Temperature -20 °C to 50 °C (-4 °F to 122 °F) Mass Approx. 1.5 kg (3.30 lb) 160 mm x 186 mm x 166 mm Dimensions (W x H x D) (6-5/16 inches x 7-41/128 inches x 6-17/32 inches) (excluding protrusions, direct ceiling mount bracket) Finish AW-HE40HW / AW-HE40SW: Pearl white AW-HE40HK / AW-HE40SK: Metallic black Controller Supported*1 AW-RP50, AW-RP120G, AK-HRP200G Camera Unit Imaging Sensors 1/2.3-type MOS Optical 30x zoom, F1.6 to F4.7[f=4.3 mm (11/64 inches) to Lens 129 mm (5-5/64 inches); 35 mm (1-3/8 inches) equivalent: 31.6 mm (1-31/128 inches) to 962.0 mm (37-7/8 inches)] Focus Switching between auto and manual Focus Distance Entire zooming range: 1.2 m (3.94 ft) Wide end: 10 cm (0.33 ft) Color Separation Optical System On-chip color filter system 59.94 Hz Minimum Illumination 50 Hz 0.7 lx (50 IRE, F1.6, 48 dB,1/60 without accumulation) 0.35 lx (50 IRE, F1.6, 48 dB,1/30 with accumulation [Frame Mix 6 dB]) 0.7 lx (50 IRE, F1.6, 48 dB,1/50 without accumulation) 0.35 lx (50 IRE, F1.6, 48 dB,1/25 with accumulation [Frame Mix 6 dB]) Horizontal Resolution 1000 TV lines Typ (Center area) Gain Selection*2 Auto, 0 dB to 48 dB (3 dB step) Frame Mix*3 Auto, Off, 6 dB, 12 dB, 18 dB, 24 dB Full Auto 1/30 to 1/2000[59.94 Hz] 1/25 to 1/2000[50 Hz] Electronic Shutter Speed Auto Manual 1/60 to 1/2000[59.94 Hz] 1/50 to 1/2000[50 Hz] 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000[59.94 Hz] 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000[50 Hz] Synchro Scan 59.94 Hz 59.94 Hz to 660.09 Hz (255 steps) 50.00 Hz to 570.12 Hz (255 steps) Gamma 50 Hz Off, Normal (Low, Mid, High), Cinema White Balance ATW, AWB A, AWB B, 3200K, 5600K, VAR (2400K to 9900K) Chroma Amount Variability ±3 step Scene File Full Auto, Manual1, Manual2, Manual3 Color Bars FULL BAR Synchronization System Synchronization System Internal synchronization Input Power MIC/LINE Input DC 12 V IN, PoE+ (IEEE802.3at standard) Stereo mini-jack (ø3.5 mm) Input impedance: Approx. 2 kΩ (unbalanced) [Mic input] •Supported microphones: Stereo mic (plug-in power,on/off switching via menu) •Supplied voltage: 2.5 V ± 0.5 V •Mic input level: -60 dBV ± 3 dBV [Line input] •Input level: -10 dBV ±3 dBV Output Video Output AW-HE40H HDMI HDMI connector • HDCP is not supported. • Viera Link is not supported. AW-HE40S Compliant with the SMPTE292M HD-SDI standards/75 (BNC x 1) Input/Output LAN LAN connector for IP control (RJ-45), PoE+ Equipped with straight/crossover cable auto detection function Input/ Output RS-232C Mini DIN 8-pin (IN) Mini DIN 8-pin (OUT) Connnector RS-422 CONTROL IN RS422A (RJ-45) USB Mini-B port (Used for maintenance) SD Card microSD card slot (Used for maintenance) USB connection * This may vary depending on the operating environment. Video output USB Video Class Ver1.0 Video compression format Motion JPEG Resolution 1920 x 1080, 1280 x 720, 640 x 360 Frame rate max 30 fps (System frequency 59.94 Hz) max 25 fps (System frequency 50 Hz) Audio output USB Audio Class Ver1.0 Audio compression format Linear PCM, 48 kHz, 16-bit, 2 channels Supported models Devices standardly equipped with a USB 2.0 compatible port Pan-tilt Head Unit Installation Method Pan-tilt Operation Speed Panning Range Tilting Range*5 Quietness Camera/Pan-tilt Head Control Stand-alone (Desktop) or suspended (Hanging)*4 Maximum speed during preset: 300°/s Maximum speed during manual: 90°/s ±175° -30° to 90°*5 During preset: NC40 or less During manual: NC35 or less • When connecting through a PoE+ hub: LAN cable*6 (category 5e or above), max. 100 m (328 ft) • When a PoE+ hub is not used: LAN cable*6 (category 5 or above) max.100 m (328 ft) AW protocol connecting cable • LAN cable*6 (category 5 or above,straight cable), max. 1000 m (3280 ft) Standard protocol connecting cable • Mini DIN 8-pin cable, male 48