Panasonic CF-19KDRAGCM Reference Manual - Page 33
PC Card / ExpressCard, Inserting/Removing the Card
UPC - 092281895840
View all Panasonic CF-19KDRAGCM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
PC Card / ExpressCard 33 You can insert the following cards. z ExpressCard/34 or ExpressCard/54 to the ExpressCard slot (A) z PC Card Type I (3.3 mm) or II (5.0 mm) to the PC Card slot (B) NOTE z The following types of card are not supported: PC Card Type III (10.5 mm), ZV card, SRAM card, FLASH ROM card (excluding ATA interface type), and other cards that require 12 V of operating voltage. z Do not start up Windows with a storage type of CardBus PC card attached. An error may occur. z Dummy cards are inserted into both of the slots at the factory. First remove the dummy cards.(Î page 40 Step 1) z Be sure to insert each dummy card when the slots are not in use. z Insert the appropriate dummy card in the correct card slot. Insert the dummy PC Card in the PC Card slot, and the dummy ExpressCard in the ExpressCard slot. Inserting a dummy card in the wrong slot may cause malfunction of the computer. Inserting/Removing the Card To insert the card 1 Open the cover. A Slide the latch (C) to the right to unlock the cover. B Slide the latch (C) down, and open the cover.