Panasonic KXTG2583S KXTG2583B User Guide - Page 25

Preparation Selecting the Number of Rings You can select the number of times the unit rings before the answering system answers a call, from "2" to "7" or "Toll saver"*. Your phone comes from the factory set to "Toll saver"*. 1 Press (FUNCTION/EXIT/CH). 2 Press Ö or Ñ repeatedly until the arrow points to "Program". 3 Press FWD/EDIT á (Yes key). 4 Press Ö or Ñ repeatedly until the arrow points to "TAD program". 5 Press FWD/EDIT á (Yes key). •The base unit display shows programming options. HSave directory Ringer volume GF H=Yes HProgram GF H=Yes HSave DIRECT# Set flash time GF H=Yes Talk switching HTAD program GF H=Yes Answering system setting. See base unit. 6 Press (2). •The current setting is displayed on the base unit. Base unit display Number of rings :Toll saver 7 Press (0), or (2) to (7) to set the number of rings. 0: Selects "Toll saver"*. 2-7: The unit will answer after the selected number of rings. 8 Press FWD/EDIT á (Save key). •A beep sounds. •To return to the standby mode, press (FUNCTION/EXIT/CH). *Toll saver When you call the unit from a touch tone telephone: If the unit answers on the 2nd ring, there is at least one new message. If the unit answers on the 4th ring, there are no new messages. Hang up when you hear the 3rd ring. This will save you the toll charge for the call. 25