Panasonic KXTG2583S KXTG2583B User Guide - Page 55

Cordless Telephone Temporary Tone Dialing (For Rotary or Pulse Service Users) Press (TONE) before entering access numbers which require tone dialing. •The dialing mode changes to tone. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the mode will return to pulse. •Access numbers entered after pressing (TONE) will not be included when redialing. FLASH Button Pressing (FLASH/CALL!WAIT/PLAYBACK) or (CALL!WAIT/FLASH) allows you to use special features of your host PBX such as transferring an extension call or accessing special telephone services (optional) such as call waiting. Selecting the flash time The flash time depends on your telephone exchange or host PBX. You can select the following flash times: "700, 600, 400, 300, 250, 110, 100 or 90 ms (milliseconds)". Your phone comes from the factory set to "700 ms". Make sure the unit is in the standby mode initially. 1 Press (FUNCTION/EXIT/CH). 2 Press Ö or Ñ repeatedly until the arrow points to "Program", and press FWD/EDIT á (Yes key). 3 Press Ö or Ñ repeatedly until the arrow points to "Set flash time", and press FWD/EDIT á (Yes key). Save DIRECT# HSet flash time GF H=Yes 4 Press Ö or Ñ repeatedly until the desired time is displayed, and press Flash time :700ms FWD/EDIT á (Save key). GF H=Save •A beep sounds. •To return to the standby mode, press (FUNCTION/EXIT/CH). •You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH). •If you are connected via a PBX, a longer flash time may be necessary to use PBX functions (transferring a call etc.). Consult your PBX supplier for the correct setting. 55