Panasonic MCCG885 MCCG885 User Guide - Page 12

C-HOW TO OPERATE YOUR CLEANER C-4 (MC-CG887) (MC-CG885) C-5 C-6 C-7 Decrease suction Diminution de l'aspiration Disminuir aspiración Suction control Régulateur d'aspiration Control de aspiración Increase suction Augmentation de l'aspiration Aumentar aspiración Performance indicator Indicateur de performance Indicador de rendimiento C-4 Select a switch position on the handle. OFF FLOOR: turns on the canister motor only. CARPET: turns on both the canister and the power nozzle motors and turns on the canister headlight Adjust the power level (Only MC-CG887). Sliding the switch to adjust the power. NOTE: When this switch is in the FLOOR position, the headlight and dirt sensors DO NOT function since no electricity flows to the power nozzle. C-5 SUCTION CONTROL The suction control allows you to change the vacuum cleaner suction for different fabrics and carpet weights. Opening the control decreases suction for draperies and lightweight rugs, while closing the control increases suction for upholsteries and carpets. C-6 PERFORMANCE INDICATOR When the vacuum cleaner is running with normal airflow, color on the performance indicator is clear. The red color comes on whenever the airflow becomes blocked. If that occurs, check the disposable dust bag, pre-motor filter and other possible clog locations. C-7 STORAGE POSITION Slide the wand holder attached to the nozzle pipe straight into the wand supporter on the left side of the canister bottom. CAUTION DO NOT leave the Power nozzle running in one spot in the upright position for any length of time. Damage to carpet may occur. Note: Refer to your carpet manufacturers cleaning recommendations. Some more delicate carpets may require that they be vacuumed with the Power nozzle agitator turned off to prevent carpet damage. 12