Panasonic MCCG885 MCCG885 User Guide - Page 22
Exhaust, What to do if your cleaner does not work, What to do when the suction performance, reduces - accessories
UPC - 037988691005
View all Panasonic MCCG885 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
D-16 D - MAINTENANCE AND SERVICING Exhaust filter D-16 Exhaust filter is installed in the rear side of the vacuum cleaner. This filter retains small dust particles which may be present in the expelled air. It is advisable to change the exhaust filter when it becomes dirty. To change the exhaust filter, hold the exhaust cover (as illustrated) and pull it out. After changing the filter, set the exhaust cover to original position (as illustrated). IMPORTANT: Never use the vacuum cleaner without the correct filters properly installed. Failure to do so may result in damage to the motor. What to do if your cleaner does not work Check that the vacuum cleaner is correctly plugged in and that the socket outlet is working. This vacuum cleaner has a thermal protector which automatically trips to protect the vacuum cleaner from overheating. If the thermal protector device has operated, wait until it resets automatically after approximately 60 minutes. If after having checked the above mentioned points, the vacuum cleaner does not work, take it to an Authorized Service Centre to be repaired. What to do when the suction performance reduces • Stop the vacuum cleaner and unplug from the socket outlet. • Check whether the wands, hose and accessories are blocked or not. If they are blocked, remove the obstruction. • Check whether the paper dust bag is full. If it is full, replace it . • Check whether the pre-motor filter or exhaust filter is blocked with dust. If they are blocked, clean them out or replace them. 22