Panasonic MCCG885 MCCG885 User Guide - Page 18
Brush Servicing, Replacing Headlight Bulb, FEATURES, Electrical Shock or Personal Injury Hazard - canister vacuum
UPC - 037988691005
View all Panasonic MCCG885 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
D - MAINTENANCE AND SERVICING D-9 Base support bars Barres de support de la base Barra de soporte de la base Agitator assembly Assemblage de l'agitateur Ensamble del agitador D-10 Brush Servicing WARNING • Electrical Shock or Personal Injury Hazard • Disconnect electrical supply before performing maintenance to the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting. D-9 TO CHECK BRUSHES: When brushes are worn to the level of the base support bar, replace the brush dowel. TO REPLACE AGITATOR ASSEMBLY Remove power nozzle cover, agitator cover, belt and agitator assembly. (See "Power nozzle care"). Replace agitator assembly. Replace belt, agitator cover, power nozzle cover and screws. Replacing Headlight Bulb D-10 Remove power nozzle cover. Push in and turn bulb counterclockwise to remove. Replace the bulb. Only use a bulb rated 130 V AC-15 Watts. Replace power nozzle cover. D-11 18 FEATURES D-11 Overload Protector The overload protector stops the power nozzle motor when the brush jams and prevents belt breakage. NOTE: Canister motor will continue to run. TO CORRECT PROBLEM: Unplug electrical cord. Check brush and brush support areas for excessive lint build-up or jamming. Clean jammed area. TO RESET: Press reset button on top of the power nozzle. Plug in and turn on vacuum cleaner.