Panasonic SDRS10PPC Sd Video Camera - English/spanish - Page 105
Problem, Check points, Has the demonstration started?
View all Panasonic SDRS10PPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Others Problem This unit cannot be operated though it is turned on. This unit does not operate normally. The screen has changed suddenly. A function indication such as the remaining time indication or the elapsed time indication is not shown. Check points ≥ The unit cannot be operated unless you open the LCD monitor. ≥ Remove the SD card then press the RESET button. (l 109) If normal conditions are not restored yet, remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the power again. (Conducting the above operation when the access lamp is on may destroy the data on the card.) ≥ Has the demonstration started? # If you set [DEMO MODE] to [ON] without inserting a card in video recording mode or picture recording mode, the unit is automatically set to the demonstration mode for introducing its functions. Normally this should be set to [OFF]. Press the MENU button, then select [SETUP] # [DEMO MODE] # [OFF] and press the cursor button in the center. ≥ If you set [SETUP]>[DISPLAY]>[OFF], indications other than warnings and date indications disappear. 105 VQT1D97