Panasonic SDRS10PPC Sd Video Camera - English/spanish - Page 30
Close the LCD monitor while, the mode dial is set to, Open the LCD monitor., To cancel Quick start
View all Panasonic SDRS10PPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Setup 2 Close the LCD monitor while the mode dial is set to or . A The status indicator A flashes green and the unit goes into quick start standby mode. 3 Open the LCD monitor. A ≥ Quick start standby mode is canceled, the status indicator goes off and the power turns off in the following cases. jWhen the mode dial is switched. ≥ When this unit is quick-started with the white balance on automatic, it may take some time until the white balance is adjusted if the scene being recorded has a light source different from the scene last recorded. (When the MagicPix function is used, however, the white balance of the scene last recorded is retained.) ≥ When this unit is quick-started, the zoom magnification becomes 1k and the view may differ from what it was before quick start standby mode. ≥ If [POWER SAVE] is set to [5 MINUTES] and the unit automatically goes into quick start standby mode, close the LCD monitor and then open it again. The status indicator A lights red and the unit is put into recording pause approx. 1.7 seconds after it is turned on. To cancel Quick start Press the MENU button then [SETUP] # [QUICK START] # [OFF] and then press the cursor button in the center. ≥ The status indicator goes off and the power turns off if the mode dial is set to OFF while the unit is in quick start standby mode. ≥ The status indicator goes off and the power turns off if quick start standby mode continues for approx. 5 minutes. 30 VQT1D97