Panasonic SDRS10PPC Sd Video Camera - English/spanish - Page 31
Inserting/removing An Sd Card
View all Panasonic SDRS10PPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Setup Inserting/removing an SD card Be sure to set the mode dial to OFF before inserting/removing an SD card. If the SD card is inserted or removed while the power is on, this unit may malfunction or the data recorded on the SD card may be lost. 1 Set the mode dial to OFF. ≥ Check that the status indicator has gone off. 2 Slide the card/battery door lock in the direction of the arrow and then open the card/ battery door. 3 Insert/remove the SD card into/from the card slot. A ≥ When inserting an SD card, place the label side A upwards and press it straight in as far as it goes. ≥ When removing the SD card, press the center of the SD card and then pull it straight out. 4 Close the card/battery door and then slide the card/battery door lock in the direction of the arrow. ≥ When the card/battery door does not open, place your finger on the [ ] part and open the card/battery door. ≥ If the card/battery door cannot be completely closed, remove the card and then insert it again. 31 VQT1D97