Panasonic SDRS10PPC Sd Video Camera - English/spanish - Page 26
Connecting to the AC, outlet, To remove the battery, Close the card/battery door
View all Panasonic SDRS10PPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Setup When the status indicator is off: ≥ Charging is completed. ≥ When the status indicator does not flash, reinsert the battery or the AC adaptor. If the status indicator still does not flash, there may be a problem with the battery or the AC adaptor. Contact your dealer. ∫ Connecting to the AC outlet Be sure to set the mode dial to OFF when connecting the AC adaptor to this unit. If you turn on this unit while charging the battery using the AC adaptor, you can use the power supplied from the AC outlet to power the unit for use. (While it is in use, the battery will not be charged.) 2 Slide the lock A in the direction of the arrow and then remove the battery. A BATT 3 Close the card/battery door and then slide the card/battery door lock in the direction of the arrow. To remove the battery ≥ Be sure to set the mode dial to OFF and check that the status indicator is off before removing the battery. 1 Slide the card/battery door lock in the direction of arrow and then open the card/battery door. ≥ When the card/battery door does not open, place your finger on the [ ] part and open the card/battery door. 26 VQT1D97