Panasonic SDRS10PPC Sd Video Camera - English/spanish - Page 29
Quick start, To turn on the power, How to turn the power on, and off with the LCD, monitor
View all Panasonic SDRS10PPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Setup How to turn the power on and off with the LCD monitor The power can be turned on and off with the LCD monitor when the mode dial is set to or . ∫ To turn on the power Open the LCD monitor. The status indicator lights and the power turns on. ∫ To turn off the power Close the LCD monitor. Quick start When quick start is ON the battery power is still being consumed, even when the LCD monitor is closed. This unit will resume recording/pause mode about 1.7 seconds after the LCD monitor is reopened. ≥ When in quick start standby mode, about half of the power used in recording pause mode is being consumed, so the recording time will be reduced. ≥ This is only activated in the following cases. jWhile using the battery When the mode dial is set to or and an SD card is inserted. jWhile using the AC adaptor When the mode dial is set to or , quick start can be used even if an SD card is not inserted. 1 Press the MENU button then select [SETUP] # [QUICK START] # [ON] and then press the cursor button in the center. The status indicator goes off and the power turns off. (If [QUICK START] is set to [ON], the unit goes into quick start standby mode and the status indicator flashes green.) ≥ The power will not turn off while recording motion pictures even if the LCD monitor is closed. Set the mode dial to OFF when the unit is not being used. 29 VQT1D97