Philips B95/37 User manual - Page 10

Option 2: Connect audio through an analog audio cable AUDIO OUT LR 1 Using an analog cable, connect the AUDIO IN connector on this product to the AUDIO OUT connector or analog audio output connectors (red and white) on TV or other devices. 2 Repeatedly press the source button until AUDIO IN displays on the display panel. Connect to power • Before connecting to the AC power cord, make sure that you have completed all other connections. • Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back or the underside of the main unit. • Connect the mains cable to the DC socket of the main unit and then into a mains socket. • Connect the mains cable to the AC~ socket of the subwoofer and then into a mains socket. Pair up with the subwoofer Automatic pairing The wireless subwoofer automatically pairs up with the main unit for wireless connection when you turn on the main unit and the subwoofer. 9 EN Determine the status based on the wireless subwoofer indicator. LED behavior Fast blink Constant on Slow blink Status Subwoofer in pairing mode Connected / Pairing successfuly Connecting / Pairing failed Note • Do not press the CONNECT (Connect) button on the rear of the subwoofer, except for manual pairing. Manual pairing If no audio from the subwoofer can be heard, manually pair up the subwoofer. 1 Unplug both the main unit and the subwoofer from the mains sockets, then plug them in again after 3 minutes. 2 Press and hold the CONNECT (Connect) button on the rear of the subwoofer for 5 seconds. » The indicator on the subwoofer blinks quickly. 3 Press and hold on the main unit or remote control for 5 seconds to switch the main unit to Eco standby. 4 Press on the main unit or remote control to switch the main unit on. » The indicator on the subwoofer blinks white quickly and SBW PAIRING displays on the display panel. » If the pairing succeeds, the indicator on the subwoofer lights up white and SBW PAIRED displays on the display panel. 5 If the pairing fails, the indicator on the subwoofer blinks slowly and CHK SBW displays on the display panel. Repeat the steps above.