Philips B95/37 User manual - Page 15

From your Blu-ray disc player: • Movie with Dolby Atmos. • Your Blu-ray disc player is connected to this product via HDMI IN 1/2 connector. • On your Blu-ray disc player, enable bitstream/raw audio format for HDMI sound output. • A high-speed HDMI cable. From your TV: • Movie with Dolby Atmos. • Your TV supports Dolby Atmos bitstream/ raw output. • Your TV is connected to this product via HDMI OUT connector. • A high-speed HDMI cable. Note • The full Dolby Atmos experience is only available when the soundbar is connected to the source via a HDMI 2.0 cable. • The soundbar will still work when connected via other methods (such as a digital optical cable) but these are unable to support all the Dolby features. To ensure full Dolby support, you are strongly recommended to connect via HDMI. Enjoy Dolby Atmos sound Press to select a height surround e ects level to best suit your personal taste according to your environment. • ATMOS 00: minimal height e ect. • ATMOS 01: small height e ect. • ATMOS 02: medium height e ect. • ATMOS 03: big height e ect. Note • For non-HDMI connections (such as use of Bluetooth, OPTICAL or AUDIO IN), only limited height surround e ects are generated. 14 EN Play audio through Bluetooth Through Bluetooth, connect this product with your Bluetooth device (such as an iPhone, iPad, Android phone, or Android pad), and then you can enjoy the audio les stored on the device through the speakers of this product. Note • The maximum operational range between this product and a Bluetooth device is approximately 10 meters (30 feet). • The music streaming may be interrupted by obstacles between the device and this product, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. • If you want to connect this product with another Bluetooth device, break the current Bluetooth connection rst. 1 Repeatedly press the source button to switch the main unit to Bluetooth mode, and wait until the display to show BT PAIR for starting the pairing operation. 2 On the Bluetooth device, turn on Bluetooth, search for and select "PlayFi Device (XXXXXX)-BT" to start connection. » When the Bluetooth connection succeeds, BT CONNECTED displays on the display panel. » If the connection fails, BT PAIR displays on the display panel. 3 Select and play audio les or music on your Bluetooth device. 4 To exit Bluetooth, select another source. MP3 player Connect your MP3 player to play your audio les or music. What you need • An MP3 player. • A 3.5mm stereo audio cable.