Philips B95/37 User manual - Page 12

8 After connection, this product may perform a software update. » Upgrade to the latest software when it is set up for the rst time. The software upgrade may take several minutes. Do not unplug your speaker, turn o your device, or break the network during the update. AirPlay setup Use AirPlay to set up the Wi-Fi connection between iOS device (iOS7 or later) and soundbar. 1 iOS device: Settings > Wi-Fi > select home network [Play-Fi device (xxxxxx)]. 2 Launch the Philips Sound app powered by DTS Play-Fi. Follow the instructions in the app to connect this product to your Wi-Fi network. » After successful Wi-Fi connection, the Wi-Fi LED indicator on the front cabinet will stop pulsing and turn solid. Once you set up this product on your Wi-Fi network, you can control it from any smartphone or tablet on the same network. » When using the app to play music, the display panel will show PLAY-FI. 3 After connection, you can change the device name. There are several names to choose from or create your own by choosing Custom Name at the bottom of the name list. Otherwise, if follows the default name. 4 After connection, this product may perform a software update. » Upgrade to the latest software when it is set up for the rst time. The software upgrade may take several minutes. Do not unplug your speaker, turn o your device, or break the network during the update. Note • After connection, the product may perform a software update. Upgrade is required after initial setup. Without the upgrade, not all product features can be available. • When the rst-time setup is not successful, press and hold the Wi-Fi button on the soundbar for 8 seconds until the second tone can be heard and the Wi-Fi LED is changed to slow pulse. Reset the Wi-Fi connection, restart the app and start the setup again. • If you want to change from one network to another, you need to set up the connection again. Press and hold the Wi-Fi button the soundbar for 8 seconds to reset the Wi-Fi connection.. WPS mode If your router has Wi-Fi Protected Setup (WPS), you can set up the connection without entering a password. 1 Press and hold the Wi-Fi button for 4 seconds. You will hear a tone and the Wi-Fi LED will begin in double blink. 2 Press the WPS button on your WPS router. The button is normally marked with this WPS logo. 3 Follow the instruction in Philips Sound app powered by DTS Play-Fi to start the pairing. Note • WPS is not a standard feature on all routers. If your router does not have WPS then use the starndard Wi-Fi setup. • Press the Wi-Fi button once if you want to exit the WPS mode or it will automatically exit after 2 mintues.. 11 EN