Philips FWD798 User manual - Page 38

English Tuner Operations IMPORTANT! -Make sure FM and AM antennas are connected. Tuning to radio stations 1 Press TUNER to select "FM XX" or "MW XX" (AM X). 2 Press and hold 1 / ¡ on the system or on the remote control until the frequency indication starts to change, then release. ➜The next radio station will be tuned automatically. 3 To tune a weak station, press 1 / ¡ on the system or on the remote control to search until a radio station with sufficient signal strength is found. ➜ PROG will start to flash. ➜ The system will start to search all radio stations on the FM band, then AM band. ➜ All radio stations with strong signal strength will be stored automatically. ➜ The system will stop searching when all available radio stations are stored or when the memory of 40 preset radio stations is full. ➜ The first preset radio station will then be played when completed. To stop storing the automatic preset ● Press 7 to stop storing the automatic preset. Note: - If no preset number is selected, automatic preset will begin from "01" and all your former presets will be overridden. Presetting radio stations You can store up to 40 preset radio stations in the memory, starting from FM and followed by AM bands. Automatic preset programming You can start automatic presetting from a selected preset number. 1 Press TUNER (BAND) to select TUNER mode. ➜ The current radio frequency will appear on the display. To begin automatic preset from a desired preset number ● Press O / P or numeric keys (0-9) to select the desired preset number. 2 Press and hold PROGRAM for 3 seconds, "AUTO SEARCHING" appears on the display. 38