Pioneer AVH-P4900DVD Owner's Manual - Page 32

Adjusting bass and treble, Adjusting loudness, Using subwoofer output

Page 32 highlights

Section 03 Operating this unit 6 Touch b and then touch c or d to select the desired Q factor. Touch c or d until the desired Q factor appears in the display. 2W-1W-1N-2N Note If you make adjustments, CUSTOM curve is updated. Adjusting bass and treble You can adjust bass and treble settings. ! If EQ-EX function has been selected and only when EQ-EX is turned on and CUSTOM is selected as the equalizer curve, you can adjust bass and treble settings. (Refer to Compensating for equalizer curves (EQ-EX) on page 34.) Adjusting bass You can adjust the cut-off frequency and the bass level. 1 Touch BASS on the audio function menu. 2 Touch a or b to adjust the bass level. Each time you touch a or b increases or decreases the bass level. +6 to -6 is displayed as the level is increased or decreased. 3 Touch c or d to select the desired frequency. Touch c or d until the desired frequency appears in the display. 40Hz-63Hz-100Hz-160Hz Adjusting treble You can adjust the cut-off frequency and the treble level. 1 Touch TREBLE on the audio function menu. 2 Touch a or b to adjust the treble level. Each time you touch a or b increases or decreases the treble level. +6 to -6 is displayed as the level is increased or decreased. 3 Touch c or d to select the desired frequency. Touch c or d until the desired frequency appears in the display. 2.5kHz-4kHz-6.3kHz-10kHz Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Touch LOUDNESS (LOUD) on the audio function menu. 2 Touch a to turn loudness on. # To turn loudness off, touch b. 3 Touch c or d to select a desired level. Each time you touch c or d selects level in the following order: LOW (low)-MID (mid)-HIGH (high) Using subwoofer output This unit is equipped with a subwoofer output which can be turned on or off. ! When the subwoofer output is on, you can adjust the cut-off frequency and the output level of the subwoofer. 1 Touch SUB WOOFER on the audio function menu. # When the subwoofer controller setting is FULL, you cannot select SUB WOOFER. 32 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85

6
Touch
b
and then touch
c
or
d
to se-
lect the desired Q factor.
Touch
c
or
d
until the desired Q factor ap-
pears in the display.
2W
1W
1N
2N
Note
If you make adjustments,
CUSTOM
curve is up-
dated.
Adjusting bass and treble
You can adjust bass and treble settings.
!
If EQ-EX function has been selected and
only when EQ-EX is turned on and
CUSTOM
is selected as the equalizer
curve, you can adjust bass and treble set-
tings. (Refer to
Compensating for equalizer
curves (EQ-EX)
on page 34.)
Adjusting bass
You can adjust the cut-off frequency and the
bass level.
1
Touch BASS on the audio function
menu.
2
Touch
a
or
b
to adjust the bass level.
Each time you touch
a
or
b
increases or de-
creases the bass level.
+6
to
6
is displayed as
the level is increased or decreased.
3
Touch
c
or
d
to select the desired fre-
quency.
Touch
c
or
d
until the desired frequency ap-
pears in the display.
40Hz
63Hz
100Hz
160Hz
Adjusting treble
You can adjust the cut-off frequency and the
treble level.
1
Touch TREBLE on the audio function
menu.
2
Touch
a
or
b
to adjust the treble level.
Each time you touch
a
or
b
increases or de-
creases the treble level.
+6
to
6
is displayed
as the level is increased or decreased.
3
Touch
c
or
d
to select the desired fre-
quency.
Touch
c
or
d
until the desired frequency ap-
pears in the display.
2.5kHz
4kHz
6.3kHz
10kHz
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Touch LOUDNESS (LOUD) on the audio
function menu.
2
Touch
a
to turn loudness on.
#
To turn loudness off, touch
b
.
3
Touch
c
or
d
to select a desired level.
Each time you touch
c
or
d
selects level in
the following order:
LOW
(low)
MID
(mid)
HIGH
(high)
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
!
When the subwoofer output is on, you can
adjust the cut-off frequency and the output
level of the subwoofer.
1
Touch SUB WOOFER on the audio func-
tion menu.
#
When the subwoofer controller setting is
FULL
, you cannot select
SUB WOOFER
.
Operating this unit
En
32
Section
03