Pioneer AVH-P4900DVD Owner's Manual - Page 40

Section 03 Operating this unit 1 Touch NEXT on the initial menu. 2 Touch D. ATT to switch the digital attenuator setting. Touching D. ATT switches the digital attenuator settings in the following order: HIGH-LOW Switching the sound muting/ attenuation Sound from this system is muted or attenuated automatically when the signal from the equipment with mute function is received. 1 Touch NEXT on the initial menu. 2 Touch TEL to select any of the muting, attenuation, mixing or off. Touch TEL until the desired setting appears in the display. ! MUTE - Muting ! ATT 20 - Attenuation (ATT 20 has a stron- ger effect than ATT 10) ! ATT 10 - Attenuation ! OFF - Turn the sound muting/attenuation off Notes ! The sound is muted or attenuated, MUTE or ATT are displayed and no audio adjustment is possible. ! Operation returns to normal when the phone connection or the voice guidance is ended. 1 Touch NEXT on the initial menu. 2 Touch RESET. 3 Touch RESET. 4 Touch RESET again to reset audio functions. # To cancel resetting the audio functions, touch CANCEL. Setting the illumination switch You can choose whether to have the illumination of this unit switch on/off when the ignition key is turned to the ACC position or the poweroff position. % Touch ILM SW on the initial menu to turn the illumination switch on. Set the illumination switch ON to have the illumination of this unit remain on when the ignition key is turned to the ACC position. Set to OFF to have the illumination off when the ignition key is turned to the ACC position. # To turn the illumination switch off, touch ILM SW again. Note Never set the illumination switch on if the vehicle does not have the ACC position. It may cause battery leakage. Resetting the audio functions You can reset all audio functions except volume. ! Only when the multi-channel processor (e.g., DEQ-P8000) is connected to this unit, you can operate this function. 40 En