Pioneer CNDV-50MTP Operation Manual - Page 49
Checking the Navigation Status, Checking sensor learning status, and driving status, Checking
View all Pioneer CNDV-50MTP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Checking the Navigation Status The navigation status, including the driving status of a vehicle, positioning status by GPS satellite, learning status of the 3D sensor, and cable connection status can be checked. To clear values... If you want to delete the learned results stored in "Distance", "Speed Pulse" or "Learning Status", touch each item, then touch "Clear". Chapter 3 Editing the Navigation Utilities Checking sensor learning status and driving status 1 Touch "Information" in the Main menu, then touch "3D Calibration". The 3D Calibration screen appears. 1 2 3 4 6 75 1. Distance Driving distance is indicated. 2. Speed Pulse Total number of speed pulses is indicated. 3. Learning Status Current sensor status is indicated. 4. Degree of learning Sensor learning situations of distance (Distance), right turn (Right Turn), left turn (Left Turn), and 3D detection (3D Detection) are indicated by the length of bars. 5. Speed Speed detected by the navigation system is indicated. (This indication may be different from the actual speed of your vehicle, so please do not use this instead of the speedometer of your vehicle.) 6. Acceleration and deceleration/Rotational speed Accelerated or decelerated velocity of your vehicle is indicated. Also, rotational speed when your vehicle turns to left or right is shown. 7. Inclination Degree of slope of the street is indicated. ❒ The navigation system can automatically detect outer dimensions of the tires. If tires have been replaced, the navigation system automatically detects it and begins learning according to the new tires. Checking the connections of leads and installation positions Check that leads are properly connected between the navigation unit and the vehicle. Please also check whether they are connected in the correct positions. 1 Touch "Information" in the Main menu, then touch "Connection Status". The Connection Status screen appears. The reception status of the signal and the connection status of each cable are shown. 1 2 3 4 5 6 7 1. Speed Pulse The Speed Pulse value detected by the navigation system is shown. "0" is shown while the vehicle is stationary. 2. GPS Antenna Indicates the connection status of the GPS antenna, the reception sensitivity, and from how many satellites the signal is received. The sign of "OK" is displayed when the signal is received normally. The sign of "No good" is displayed when the reception condition is not good. 3. Installation Position Indicates whether the Installation position of the navigation unit is correct or not. When the navigation unit is installed with an extreme angle exceeding the limitation of the installing angle, "Incorrect angle" 47