Pioneer CNDV-50MTP Operation Manual - Page 61

About AV Head Units /Displays to be Connected You need an AV head Unit or Display with a touch panel feature to use this software. If a display that does not have a touch panel feature is connected, the software will not function properly. This includes Pioneer displays that do not have touch panel features. Make sure to use a display suitable for the system. For details, consult a dealer or product catalog. Group 1 - AV Head Unit The type of the unit that can be a control master with the following features (e.g. AVH-P7600DVD, AVH-P5700DVD, AVH-P6600DVD, AVHP6500DVD, and AVH-P7500DVD): • a source unit can be connected to it directly, and • a built-in amplifier and display are equipped. Group 2 - Display Type AVD The type of the unit that has a built-in amplifier only for the built-in speaker(s) and cannot be a control master because other unit cannot be connected to it (e.g. AVD-W6210). Group 3 - AV system display with Master/ Slave switch The type of the unit that has no amplifier and can be a control master by being switched to Master and connected with other unit(s) (e.g. AVXP8DVD). Features available to each Group Group 3 Group 1 Group 2 Master Slave "Touch Panel Operation When Using NAVI Source" (➞ Page 60) X - X Map Display • AV Guide Mode (➞ Page 50) X - X • Arrow in AV (➞ Page 50) X - X Mute Setting • Voice Recognition (➞ Page 51) X *1 X *1 X *2 • Voice Guidance (➞ Page 51) X *1 X *1 X *2 "Common commands for Audio operations" (➞ Page 55) X - X - *3 *1: The AV Head Unit or Display must be set to Mute or ATT while the Guidance is being performed by the Navigation System. *2: Available when the GUIDE ON lead of the Navigation System is connected to the Pioneer Head Unit. *3: Recognizable commands are Source On, Source Off, Display AV, Display Navi, Navigation Audio, Next page, Previous page, Repeat, and Back. Appendix 59