Pioneer DEH-P80MP Operation Manual - Page 58
Turning the clock display, on or off, Using the AUX source, Other Functions
View all Pioneer DEH-P80MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Section 13 Other Functions Turning the clock display on or off You can turn the clock display on or off. % Press CLOCK to turn the clock display on or off. Each press of CLOCK turns the clock display on or off. # The clock display disappears temporarily when you perform other operations, but the clock display appears again after 6 seconds. Note Even when the sources are off, the clock display appears on the display. Pressing CLOCK turns the clock display on or off. Using the AUX source An IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separately) lets you connect this unit to auxiliary equipment featuring RCA output. For more details, refer to the IP-BUS-RCA Interconnector owners manual. Selecting AUX as the source % Press SOURCE to select AUX as the source. Press SOURCE until AUX appears in the display. # If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switching the auxiliary setting on page 55. Setting the AUX title The title displayed for the AUX source can be changed. 1 After you have selected AUX as the source, use Multi-Control and select FUNCTION to display TITLE. 2 Press DISPLAY to select the desired character type. Press DISPLAY repeatedly to switch between the following character types: Alphabet (upper case), numbers and symbols Alphabet (lower case)European letters, such as those with accents (e.g Numbers and symbols 3 Push Multi-Control up or down to select a letter of the alphabet. Each pushing Multi-Control up will display a letter of the alphabet in A B C ... X Y Z, numbers and symbols in 1 2 3 ... @ # < order. Each pushing Multi-Control down will display a letter in the reverse order, such as Z Y X ... C B A. 4 Push Multi-Control right to move the cursor to the next character position. When the letter you want is displayed, push Multi-Control right to move the cursor to the next position and then select the next letter. Push Multi-Control left to move backwards in the display. 5 Move the cursor to the last position by pushing Multi-Control right after entering the title. When you push Multi-Control right one more time, the entered title is stored in memory. 6 Press BAND to return to the playback display. 58 En