Pioneer SEP C1 Owner's Manual - Page 25

USING THE UTILITY USING THE UTILITY Press the UTILITY button to display the UTILITY screen and make unit settings. Function buttons UTILITY BROWSE MIX EFFECT UTILITY English Rotary selector dial Select down ( ) button SETTING METHOD 1 Use the function buttons to select the item you wish to set [DISPLAY/PC/LANGUAGE/GENERAL]. 2 Rotate the rotary selector dial to align the cursor with the desired setting item. 3 Press either the select down () button or the rotary selector dial to move the  icon to the right side. 4 Turn the rotary selector dial to select the desired setting value. 5 Press the rotary selector dial to confirm the new setting value. Also, to reset a setting to its default value, press the select up () button. MEMO • Grayed-out CD-G and BROWSE cannot be set on this unit. SETTINGS [1] DISPLAY Use to perform settings for center display and external output. Factory default setting LCD BRIGHTNESS Displays brightness of center display. OEL BRIGHTNESS Displays brightness of display A/B. LED BRIGHTNESS Displays brightness of LEDs. SCREEN SAVE *1 After the set time without ON user operation, the LCD and OEL screens are dimmed in order to preserve the displays. TV STANDARD Sets signal format for monitor output (PAL, NTSC (7.5 IRE), NTSC (0 IRE). NTSC (7.5 IRE) MONITOR OUT Sets center display aspect OFF ratio to letterbox, full-screen, or OFF. *1 Screen saver operation • The screensaver operates when five minutes have passed without a track being loaded in either controller. • The screensaver also operates after 100 minutes passes without any button input when either one or both of the controllers is in pause mode (including cue standby or END display). • The screen saver is disabled when a track is set with DJ software other than DJS. • During operation of the screensaver, pressing a button or performing any other command operation will cancel the screensaver. [2] PC The MIDI channel can be set (P. 22). 25 En