Ricoh C410DN Software User Guide - Page 214
bonjour(rendezvous), Setting order of priority for each protocol
UPC - 026649025341
View all Ricoh C410DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
Monitoring and Configuring the Printer ❖ Interface priority configuration msh> autonet priority "interface_name" • You can give interface's AutoNet parameter priority. • Priority settings are available when multiple interfaces are installed. • wlan can be specified only when the IEEE 802.11b interface is installed. Interface name Interface configured ether Ethernet interface wlan IEEE 802.11b interface Note ❒ If an interface is not selected, the current interface connection settings remain in effect. Reference For details about AutoNet, refer to autonet parameters. bonjour(rendezvous) 6 Use the "bonjour(rendezvous)" command to display bonjour(rendezvous)-related settings. ❖ View settings Bonjour settings are displayed. msh> bonjour ❖ Bonjour service name setting You can specify the bonjour service name. msh> bonjour cname "computer name" • The computer name can be entered using up to 63 alphanumeric characters. ❖ Bonjour Installation location information setting You can enter information about the location where the printer is installed. msh> bonjour location "location" • Information about location can be entered using up to 32 alphanumeric characters. ❖ Setting order of priority for each protocol • diprint msh> bonjour diprint [0-99] • lpr msh> bonjour lpr [0-99] • ipp msh> bonjour ipp [0-99] You can specify the order of priority for "diprint", "lpr", and "ipp". Smaller 202 numbers indicate higher priority.