Ricoh C410DN Software User Guide - Page 222
info, ipp, msh> info, msh> ipp timeout [30 - 65535], msh> ipp auth {basic|digest|off}
UPC - 026649025341
View all Ricoh C410DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
Monitoring and Configuring the Printer Note ❒ To get the above addresses, contact your network administrator. ❒ Use the default configuration if you cannot obtain setting addresses. ❒ The IP address, subnet mask and broadcast address are the same as that for the ethernet interface and IEEE 802.11b interface. ❒ TCP/IP configuration is the same for both Ethernet and IEEE 802.11 interface. If interfaces are changed, the new interface inherits the configuration. ❒ Use "0x" as the initial two letters of a hexadecimal address. info Use the "info" command to display printer information such as paper tray, output tray, and printer language. ❖ Printer information display msh> info Reference 6 For details about displayed contents, see p.231 "Getting Printer Information over the Network". ipp Use the "ipp" command to view and configure IPP settings. ❖ Viewing settings The following command displays the current IPP settings: msh> ipp ❖ IPP timeout configuration Specify how many seconds the computer waits before canceling an interrupted print job. The time can be entered between 30 to 65535 seconds. msh> ipp timeout [30 - 65535] ❖ IPP user authorization configuration Use IPP user authorization to restrict users to print with IPP. The default is "off". msh> ipp auth {basic|digest|off} • User authorization settings are "basic" and "digest". • Use "off" to remove a user's authorization. • If user authorization is specified, register a user name. You can register up to 10 users. 210