Ricoh C410DN Software User Guide - Page 244
Messages, Description, Error: Parallel I/F Board - waste toner
UPC - 026649025341
View all Ricoh C410DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
Monitoring and Configuring the Printer Messages Error at Printer: Red LED Error in Printer Error: Address Book Error: Command Transmission Error: DIMM Value Error: Ethernet Board Error: HDD Board Error: Memory Switch Error: Optional Font Error: Optional RAM Error: Parallel I/F Board Error: PDL Error: USB Interface 6 Error: Wireless Card Exceed Booklet Stapling Limit Full: Finisher Full: Finisher Shift Tray Full: Finisher Shift Tray 1, 2 Full: Finisher Upper Tray Full: Hole Punch Receptacle Full: Waste Toner Hex Dump Mode Immed. Trans. not connected Immediate Transmission Failed In Use: Copier In Use: Fax In Use: Finisher In Use: Input Tray In Use: Staple Unit Independent-supplier Toner Key Card not inserted 232 Description An error has occurred. An error has occurred. An error has occurred in the data of the address book. An error has occurred in the printer. A memory error occurred. An Ethernet board error has occurred. A hard disk drive board error has occurred. A memory switch error has occurred. An error has occurred in the font file of the printer. An error has occurred in the optional memory unit. An error has occurred in the parallel interface. An error has occurred in the page description language. An error has occurred in the USB interface. Wireless card is not inserted during start up, or the IEEE 802.11b interface unit or the wireless card is taken out after start up. The printing has exceeded the stapling limit of the booklet finisher. Finisher tray is full. Shift tray of Finisher is full. The shift tray 1 and 2 of Finisher are full. The upper tray of Finisher is full. Punch Chip receptacle for hole punch is full. Waste toner is full. It is a hex dump mode. It did not connect directly with the other party of the transmission. An error has occurred while transmitting directly. The copier is being used. The fax is being used. Other functions is using Finisher. Other functions is using the input tray. Other functions is using the staple unit. Toner that is not recommended is set. The printer is waiting for key card to be inserted.