Samsung DV435GTGJRA/A1 User Manual Ver.1.0 (English, French, Spanish) - Page 19

Connecting The Inlet Hose

Get Samsung DV435GTGJRA/A1 PDF manuals and user guides View all Samsung DV435GTGJRA/A1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

01 INSTALLING YOUR DRYER CONNECTING THE INLET HOSE Method 1 The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old hoses. 1. If space permits, attach the brass female end of the "Y" connector to the cold water faucet. 2. Turn the cold water faucet off. 3. Attach the straight end of long hose to the "Y' connector. 4. Using pliers, tighten the coupling with an additional two- thirds turn. Do not overtighten, as this may damage the coupling. 5. Attach the angled end of long hoses to fill the valve at the bottom of the dryer's rear frame. Screw on the coupling by hand until it is seated on the fill valve connector. 6. Using the pliers, tighten the coupling with an additional twothirds turn. Y-Connector Water Hose Duct Exhaust Frame (back) Do not overtighten, as this may damage the coupling. 7. Check that the water faucets are on. 8. Check for leaks around the "Y" connector, faucets and hoses. Water Hose DV435-02836G_EN_20120522.indd 19 Installing your dryer _19 2012-05-22 12:13:46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
Installing your dryer _
19
01 INSTALLING YOUR DRYER
CONNECTING THE INLET HOSE
Method 1
The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old
hoses.
1.
If space permits, attach the brass female end of the “Y”
connector to the cold water faucet.
2.
Turn the cold water faucet off.
3.
Attach the straight end of long hose to the “Y’ connector.
4.
Using pliers, tighten the coupling with an additional two-
thirds turn.
Do not overtighten, as this may damage the coupling.
5.
Attach the angled end of long hoses to fill the valve at the
bottom of the dryer’s rear frame. Screw on the coupling by
hand until it is seated on the fill valve connector.
6.
Using the pliers, tighten the coupling with an additional two-
thirds turn.
Do not overtighten, as this may damage the coupling.
7.
Check that the water faucets are on.
8.
Check for leaks around the “Y” connector, faucets and
hoses.
Duct Exhaust
Frame
(back)
Water Hose
Y-Connector
Water Hose
DV435-02836G_EN_20120522.indd 19
DV435-02836G_EN_20120522.indd
19
2012-05-22
12:13:46
2012-05-22
12:13:46