Home » Samsung Manuals » Laser Printers » Samsung ML-1740 » Manual Viewer

Samsung ML-1740 User Manual (ENGLISH) - Page 97

Paper, Start, Settings, Printers, Samsung, ML-1740, Properties, Details, Spool Settings - printer driver ml

Add to My Manuals
Save this manual to your list of manuals

Page 97 highlights

Problem Possible Cause Solution The printer does not print. (continued) The printer driver may be incorrectly installed. Reinstall the printer driver; see page 2.18. Try printing a demo page. The printer is malfunctioning. Check the LEDs on the control panel to determine if the printer is indicating a system error. Printer selects materials from the wrong paper source. The paper source selection in the printer properties may be incorrect. For many software applications, the paper source selection is found under the Paper tab within the printer properties. Select the correct paper source. See page 4.6. Paper does not feed into the printer. Paper has not been loaded correctly. There is too much paper in the tray. Remove paper from the tray and reload it correctly. Remove excess paper from the tray. The paper is too thick. Use only paper that meets the specifications required by the printer. Print job is extremely slow. The job may be very complex. Reduce the complexity of the page or try adjusting the print quality settings. The maximum print speed of the printer is 16(A4) or 17(Letter) pages per minute. If using Windows 9x/ Me, the Spooling Setting may be set incorrectly. From the Start menu, choose Settings and Printers. Right-click the Samsung ML-1740 Serise printer icon, choose Properties, click the Details tab, and then choose the Spool Settings button. Select the desired spool setting. Half the page is blank. The page layout is too Simplify the page layout and remove any complex. unnecessary graphics from the document. The page orientation setting may be incorrect. Change the page orientation in your application. The paper size and the paper size settings do not match. Ensure that the paper size in the print settings matches the paper in the tray. 6.4 SOLVING PROBLEMS

Section	Page
Contents	3
Introduction	10
Special Features	11
Printer Components	13
Front View	13
Inside View	14
Rear View	14
Understanding the Control Panel	15
On Line/Error and Toner Save LEDs	15
Cancel button	16
Setting Up Your Printer	18
Unpacking	19
Selecting a Location	20
Installing the Toner Cartridge	21
Loading Paper	23
Changing the Paper Size in the Tray	25
Connecting a Printer Cable	26
Turning the Printer on	28
Printing a Demo Page	29
Installing Printer Software	30
Printer Driver Features	31
Installing Printer software in Windows	32
Viewing the User’s Guide	37
Using Print Materials	38
Choosing Paper and Other Materials	39
Sizes and Capacities	40
Guidelines for Paper and Special Materials	41
Selecting the Output Location	42
Printing to the Top Output Tray (Face down)	42
Printing to the Rear Output Tray (Face up)	43
Loading Paper	44
Using the Tray	44
Using the Manual Feeder	45
Printing on Envelopes	47
Printing on Labels	49
Printing on Transparencies	50
Printing on Card Stock or Custom-sized Materials	52
Printing on Preprinted Paper	53
Printing Tasks	56
Printing a Document	57
Canceling a Print Job	59
Using a Favorite Setting	60
Using Help	60
Setting Paper Properties	61
Using the Toner Save Mode	63
Printing Multiple Pages on One Sheet of Paper (N-Up Printing)	65
Scaling Your Document	67
Fitting Your Document to a Selected Paper Size	68
Printing Posters	69
Setting Graphic Properties	71
Printing Watermarks	74
Using an existing Watermark	74
Creating a Watermark	75
Editing a Watermark	76
Deleting a Watermark	76
Printing Overlays	77
What is an Overlay?	77
Creating a New Page Overlay	77
Using a Page Overlay	79
Deleting a Page Overlay	80
Using the Status Monitor	81
Opening the Status Monitor	81
Setting Up Locally Shared Printer	83
Windows 9x/Me	83
Windows NT/2000/XP	84
Maintaining Your Printer	86
Maintaining the Toner Cartridge	87
Redistributing Toner	88
Replacing the Toner Cartridge	89
Cleaning the Printer	90
Cleaning the Outside	90
Cleaning the Inside	90
Consumables and Replacement Parts	93
Solving Problems	94
Troubleshooting Checklist	95
Solving General Printing Problems	96
Clearing Paper Jams	100
In the Paper Exit Area	100
In the Paper Feed Area	102
Around the Toner Cartridge	103
Tips for Avoiding Paper Jams When Printing on the A5-sized Paper	104
Tips for Avoiding Paper Jams	105
Solving Print Quality Problems	105
Print Quality Checklist	105
Solving Print Quality Problems	106
Troubleshooting Error Messages	111
Common Windows Problems	112
Common Macintosh Problems	113
Problems in the Chooser	113
Printing Errors	113
Common Linux Problems	114
Appendix	118
Using Your Printer in Macintosh	119
Installing Software in Macintosh	119
Printing a Document	124
Using Advanced Printing Features	126
Using Your Printer in Linux	131
Installing the Printer Driver	131
Using the Configuration Tool	137
Changing LLPR Properties	139
Printer Specifications	141
Paper Specifications	142
Overview	142
Supported Sizes of Paper	143
Guidelines for Using Paper	144
Paper Specifications	145
Paper Output Capacity	145
Printer and Paper Storage Environment	146

Match case Limit results 1 per page

OLVING

ROBLEMS

Problem

Possible Cause

Solution

The printer

does not print.

(continued)

The printer driver may

be incorrectly

installed.

Reinstall the printer driver; see

page 2.18. Try printing a demo page.

The printer is

malfunctioning.

Check the LEDs on the control panel to

determine if the printer is indicating a

system error.

Printer selects

materials from

the wrong

paper source.

The paper source

selection in the printer

properties may be

incorrect.

For many software applications, the paper

source selection is found under the

Paper

tab within the printer properties. Select

the correct paper source. See page 4.6.

Paper does not

feed into the

printer.

Paper has not been

loaded correctly.

Remove paper from the tray and reload it

correctly.

There is too much

paper in the tray.

Remove excess paper from the tray.

The paper is too thick.

Use only paper that meets the

specifications required by the printer.

Print job is

extremely

slow.

The job may be very

complex.

Reduce the complexity of the page or try

adjusting the print quality settings.

The maximum print speed of the printer

is 16(A4) or 17(Letter) pages per minute.

If using Windows 9x/

Me, the Spooling

Setting may be set

incorrectly.

From the

Start

menu, choose

Settings

and

Printers

. Right-click the

Samsung

ML-1740

rise

printer icon, choose

Properties

, click the

Details

tab, and

then choose the

Spool Settings

button.

Select the desired spool setting.

Half the page

is blank.

The page layout is too

complex.

Simplify the page layout and remove any

unnecessary graphics from the document.

The page orientation

setting may be

incorrect.

Change the page orientation in your

application.

The paper size and

the paper size settings

do not match.

Ensure that the paper size in the print

settings matches the paper in the tray.