Samsung MultiXpress SCX-8248 User Guide - Page 237
tray MP. Load, Option Feed door
View all Samsung MultiXpress SCX-8248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
Message HDD System Failure [error number]:Turn off then on. ICON device is not installed. Install the device. Input System Failure [error number]:Check the HCF connection. Input System Failure [error number]:Pull [tray number] out and insert it. ITB Unit Failure [error number]:Turn off then on. MSOK System Failure [error number]:Turn off then on. Network cable is disconnected. Check it. Option Feed door is opened. Close it. Original paper jam in exit area of scanner Original paper jam in front of scanner Original paper jam inside of scanner Output tray(face down) is full. Remove printed media Meaning There is a problem in the hard disk. The image converter device is not installed. There is a problem in the high capacity feeder. There is a problem in the tray. There is a problem in the image transfer belt unit. There is a problem in the engine system. The machine is not connected with a network cable. The door is not securely latched. The originals are jammed in duplex automatic document feeder. The originals are jammed in duplex automatic document feeder. The originals are jammed in duplex automatic document feeder. The output tray (face down) is full. Suggested solutions Turn the machine off and back on again. If the problem persists, call for service. Install the image converter device. If it is already installed, try to reinstall the image converter device. If the problem persists, call for service. Open and close the high capacity feeder, or check the high capacity feeder connection with the machine. If the problem persists, call for service. Open and close the tray. If the problem persists, call for service. Turn the machine off and back on again. If the problem persists, call for service. Turn the machine off and back on again. If the problem persists, call for service. Connect the machine to the network with a network cable. Close the door until it locks into place. Clear the jam (see "Original paper jam in exit area of scanner" on page 206). Clear the jam (see "Original paper jam in front of scanner" on page 201). Clear the jam (see "Original paper jam inside of scanner" on page 202 or "Original paper jam in front of scanner duplex path" on page 204). Remove papers from the output tray (face down), the machine resumes printing. Message Output tray(face up) is full. Remove printed media Paper is empty in [tray number]. Load paper. Paper is empty in tray MP. Load paper. Paper is low in [tray number]. Load paper. Paper jam after booklet folding. Paper jam around puncher of finisher Paper jam at entrance of finisher Paper jam at entrance of booklet maker. Paper jam at entrance of finisher bridge Paper jam at exit of finisher Paper jam at exit of finisher bridge Paper Jam at the bottom of duplex path Paper Jam at the inside of duplex path Meaning The output tray (face up) is full. There is no paper in the tray. There is no paper in the multi-purpose tray. Running out of paper in the tray. Paper has jammed during booklet printing. Paper has jammed during finishing. Paper has jammed during finishing. Paper has jammed during booklet printing. Paper has jammed during finishing. Paper has jammed during finishing. Paper has jammed during finishing. Paper has jammed during duplex printing. Paper has jammed during duplex printing. Suggested solutions Remove papers from the output tray (face up), the machine resumes printing. Load paper in the tray. Load paper in the multi-purpose tray. Load paper in the tray. Clear the jam (see "Paper jam after booklet folding (3,250-sheet booklet finisher only)" on page 233). Clear the jam (see "Paper jam around puncher of finisher" on page 228). Clear the jam (see "Paper jam at entrance of finisher" on page 226). Clear the jam (see "Paper jam at entrance of booklet maker (3,250-sheet booklet finisher only)" on page 228). Clear the jam (see "Paper jam inside of finisher bridge" on page 226 or). Clear the jam (see "Paper jam at finisher's exit during ejection to the top bin" on page 223 or "Paper jam at finisher's exit during ejecting to main bin" on page 224). Clear the jam (see "Paper jam at entrance of finisher" on page 226). Clear the jam (see "Paper jam bottom of duplex path (Jam Duplex Regi.)" on page 221). Clear the jam (see "Paper jam at the inside of duplex path (Jam Duplex 2)" on page 220). Troubleshooting_ 237