Samsung MultiXpress SCX-8248 User Guide - Page 60
Changing the darkness, Proof copying, Paper Supply
View all Samsung MultiXpress SCX-8248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
• The hole punch function is available only when the punch kit is installed in the optional standard or booklet finisher. • Numbers of punched holes are depending on the punch kit. You can purchase the 2/3 hole punch kit or 2/4 hole punch kit. • When you use the punch feature, only the finishing tray is available for printouts. • When you have set the the Staple options before setting the Punch options, some options are not available depending on the number of staples, staple position and the direction of paper feeding in the trays. - Off: Disables this feature. - 2 Holes: Two holes are punched in the left, right, or top. When the loaded paper is short edge feeding, you can choose Left or Right; while the loaded paper is long edge feeding, you can choose only Top. - 3 Holes: Three holes are punched in the left, right, or top. When the loaded paper is short edge feeding, you can choose Left or Right, while the loaded paper is long edge feeding, you can choose only Top. Changing the darkness Press the Basic tab. You can adjust the degree of darkness using the left/right arrows. This feature allows dark images to be printed into lighter images, or light images into darker images. Refer to the sample images below. Depending on the circumstances and quality of originals, the printout's quality could be different from the sample image's. Light Moderatel Original y light Moderatel Dark y dark Proof copying This mode is useful when you print more than one copy. You can print one copy first to check the quality, then print the rest of copies later. 1. Press Copy from the display screen. 2. Place the originals face up in the DADF or place a single original face down on the scanner glass and close the DADF (see "Loading originals" on page 35). 3. Adjust the settings for each copy such as Paper Supply, Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the settings for each copy" on page 54). 4. Enter the number of copies using the numeric keypad. 5. Press Proof Copy. 6. Set the copy features in the Advanced or Image tabs, if necessary (see "Using special copy features" on page 61). 7. Press Start on the control panel to begin copying. 8. Check the quality of the printout. 9. When the proof copy confirmation window appears, if you like the printout quality, press Continue. The rest of the copies will be printed out. If you press Cancel, the rest of the copies will be cancelled. Copying_ 60