Samsung MultiXpress SCX-8248 User Guide - Page 70

Cover copying, Transparency copying, Sided Printed Sheet

Page 70 highlights

Cover copying The machine automatically adds covers to your copied set using stock taken from a different tray. Covers must be the same size and orientation as the main body of the job. You cannot use this feature while using Booklet (see "Booklet copying" on page 68). Transparency copying This feature prevents copies to print onto transparencies from sticking together as a cause by heat that is produced during copying. You can also copy originals to the separator sheets. 1. Press Copy from the display screen. 2. Place the originals face up in the DADF or place a single original face down on the scanner glass and close the DADF (see "Loading originals" on page 35). 3. Select the tray, other than Auto, that has the cover paper loaded in the Basic tab. • If you select Auto, the Covers feature remains inactive. • You have to select a tray that has paper of the same size and orientation as the originals. 4. Adjust the settings for each copy such as Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the settings for each copy" on page 54). 5. Press the Advanced tab > Covers from the display screen. 6. Press the appropriate option. • Off: Disables this feature. • Front: Prints the document with the front cover. • Back: Prints the document with the back cover. • Front & Back: Prints the document with the front and back cover. 7. Press 1 Sided Printed Sheet in Cover Sheet to select if the cover will be 1-sided, 2-sided, or blank paper. 8. Select a tray in Paper Source. 9. Press OK from the display screen. 10. Press Start on the control panel to begin copying. 1. Place the originals face up in the DADF or place a single original face down on the scanner glass and close the DADF (see "Loading originals" on page 35). 2. Load the right-sized transparencies with the side to be printed facing down on the multi-purpose tray. 3. Press Machine Setup > Tray Settings > Settings > MP Tray > Paper type > Transparency > OK from the display screen. 4. Press ( ) and Copy from the display screen. 5. Press the Advanced tab > Transparency from the display screen. 6. Press the appropriate option. • No Transparency: Does not place separator sheets between transparencies. • Blank Separators: Places a blank sheet between transparencies. Select a tray which loaded paper for separating from Separator. • Printed Separator: Places the same image on the separator sheets as printed on the transparency. Select a tray which loaded paper for separating from Separator. 7. Press OK from the display screen. If you did not select Transparency in step 3, a pop-up window appears. 8. Press Start on the control panel to begin copying. Copying_ 70

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265

Copying
_ 70
Cover copying
The machine automatically adds covers to your copied set using stock taken
from a different tray. Covers must be the same size and orientation as the
main body of the job.
You cannot use this feature while using
Booklet
(see "Booklet
copying" on page 68).
1.
Press
Copy
from the display screen.
2.
Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 35).
3.
Select the tray, other than
Auto
, that has the cover paper loaded in the
Basic
tab.
If you select
Auto
, the
Covers
feature remains inactive.
You have to select a tray that has paper of the same size and
orientation as the originals.
4.
Adjust the settings for each copy such as
Reduce/Enlarge
,
Duplex
and
more in the
Basic
tab (see "Changing the settings for each copy" on
page 54).
5.
Press the
Advanced
tab >
Covers
from the display screen.
6.
Press the appropriate option.
Off:
Disables this feature.
Front:
Prints the document with the front cover.
Back:
Prints the document with the back cover.
Front & Back:
Prints the document with the front and back cover.
7.
Press
1 Sided Printed Sheet
in
Cover Sheet
to select if the cover will
be 1-sided, 2-sided, or blank paper.
8.
Select a tray in
Paper Source
.
9.
Press
OK
from the display screen.
10.
Press
Start
on the control panel to begin copying.
Transparency copying
This feature prevents copies to print onto transparencies from sticking
together as a cause by heat that is produced during copying. You can also
copy originals to the separator sheets.
1.
Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 35).
2.
Load the right-sized transparencies with the side to be printed facing
down on the multi-purpose tray.
3.
Press
Machine Setup
>
Tray Settings
>
Settings
>
MP Tray
>
Paper
type
>
Transparency
>
OK
from the display screen.
4.
Press (
) and
Copy
from the display screen.
5.
Press the
Advanced
tab >
Transparency
from the display screen.
6.
Press the appropriate option.
No Transparency:
Does not place separator sheets between
transparencies.
Blank Separators:
Places a blank sheet between transparencies.
Select a tray which loaded paper for separating from
Separator
.
Printed Separator:
Places the same image on the separator sheets
as printed on the transparency. Select a tray which loaded paper for
separating from
Separator
.
7.
Press
OK
from the display screen.
If you did not select
Transparency
in step 3, a pop-up window
appears.
8.
Press
Start
on the control panel to begin copying.