Samsung SF-565 User Manual (ENGLISH) - Page 72
Replace the roller by inserting the left end first followed by the right
View all Samsung SF-565 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
3 Disassemble the white roller as follows: The right end of the white roller has a plastic bushing that is snapped shut with small tab on it. Pull the bushing slightly inward, then rotate the bushing until it reach a slot (1). Then pull the roller upward (2). 4 Wipe the roller surface with a soft cloth dampened with water. 5 Carefully wipe the scanning glass with a soft dry cloth. If the glass is very dirty, first wipe it with a slightly dampened cloth, and then with a dry cloth. Be very careful not to scratch the glass surface. 5 6 Replace the roller by inserting the left end first followed by the right end, then rotating the bushing until it locks into place. 7 Reconnect the support and the control panel, then close the control panel firmly until it clicks into place. MAINTENANCE 5.5