Samsung SF-565 User Manual (ENGLISH) - Page 76
Replacing the ADF Rubber Pad, on the plate into the slots on the machine. Press them until they are - driver
View all Samsung SF-565 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Replacing the ADF Rubber Pad You can purchase a ADF rubber assembly from a Samsung dealer or the retailer where you bought your machine. 1 Open the control panel by gripping its bottom and pulling it upward. 2 Disconnect the support on the left side of the machine from the control panel and lift the control panel up to the complete open position 3 Remove the control panel from the machine by disconnecting the hinge on the right. NOTE: Be careful no to disconnect the connector on the control panel from the machine as it turns the LCD off. 4 Using a screw driver, press the slots on the ADF rubber plate to unlatch the plate and the ADF rubber. 5 5 Align the holes on the new ADF rubber and the plate and inset the tabs on the plate into the slots on the machine. Press them until they are latched. 6 Replace the control panel by connecting the hinge on the right first then inserting the left arm while pushing the control panel to the right. 7 Reconnect the support and the control panel, then close the control panel firmly until it clicks into place. MAINTENANCE 5.9