Home » Samsung Manuals » Printers » Samsung SF-565 » Manual Viewer

Samsung SF-565 User Manual (ENGLISH) - Page 83

Display, Meaning, Suggested solutions, LSU Laser Scanning Unit.

Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

Display [Comm. Error] CRU Fuse Error Document Jam [Door Open] Group Not Available [Incompatible] [Jam 1] or [No Cartridge] Line Busy [Line Error] Load Document [Low Heat Error] Open Heat Error [Over Heat] [LSU Error] Memory Full Meaning The machine has a communication problem. The machine has a problem with recognizing the new toner cartridge. The loaded document has jammed in the ADF (Automatic Document Feeder). The front or rear cover is not securely latched. You have tried to select a group location number where only a single location number can be used, such as when adding locations for a broadcasting operation. The remote machine does not have the requested feature, such as a delayed transmission. It also occurs if the remote machine does not have enough memory space to complete the operation you are attempting. The toner cartridge is not installed. The remote person did not answer or the line is already engaged. Your machine cannot connect with the remote machine or has lost contact because of a problem with the phone line. You have attempted to set up a copy or fax operation with no document loaded. There is a problem in the fuser unit. Suggested solutions Ask the sender to try again. Please contact a service representative. Clear the document jam. See page 6.2. Close the cover until it locks into place. Just use a one-touch or speed dial number or dial a number manually using the number keypad. Reconfirm the remote machine's features. Install the toner cartridge. See page 1.8. Try again after a few minutes. Try again. If the problem persists, wait an hour or so for the line to clear and try again. Or, turn the ECM on. See page 4.6. Load a document and try again. Unplug the power cord and plug it back in. If the problem persists, please contact a service representative. A problem has occurred in the LSU (Laser Scanning Unit). The memory is full. Unplug the power cord and plug it back in. If the problem persists, please call for service. Delete unnecessary documents, retransmit after more memory becomes available or split the transmission into more than one operation. 6.6 TROUBLESHOOTING

Section	Page
Contents	5
Getting Started	16
Unpacking	17
Selecting a Location	18
Understanding the Component Location	19
Front View	19
Rear View	19
Control Panel Functions	20
Attaching Accessories	21
Document Output Support	21
Handset and Handset Cradle	22
Installing the Toner Cartridge	23
Loading Paper	24
Connecting the Telephone Line	26
Turning the Machine On	27
Changing the Display Language	28
Setting the Machine ID	28
Entering Characters Using the Number Keypad	29
Setting the Date and Time	30
Changing the Clock Mode	31
Setting the Paper Type and Size	31
Setting Sounds	32
Speaker, Ringer, Key Sound and Alarm Sound	32
Speaker Volume	32
Using the Save Modes	33
Toner Save Mode	33
Toll Save Mode	33
Power Save Mode	34
Setting Up the Fax System	34
Available Fax Setup Options	35
Basic Functions	36
Preparing a Document	37
Loading a Document	37
Adjusting the Document Resolution	38
Sending a Fax Automatically	39
Sending a Fax Manually	39
Redialing the Last Number	40
Confirming Transmission	40
Automatic Redialing	40
About Receiving Modes	41
Loading Paper for Receiving Faxes	41
Receiving Automatically in Fax Mode	42
Receiving Manually in Tel Mode	42
Receiving Automatically in Ans/Fax Mode	42
Receiving Manually Using an Extension Telephone	43
Receiving Faxes Using the DRPD Mode	43
Receiving Faxes in the Memory	44
Loading Paper for Copying	45
Setting the Paper Type and Size for the Manual Feeder	46
Making a Copy	46
Setting Copy Options	47
Darkness	47
Original Type	47
Number of Copies	47
Reduced/Enlarged Copying	48
Changing the Default Settings	48
Setting the Time Out Option	49
Collation Copying	49
One-touch Dialing	50
Storing a Number for One-touch Dialing	50
Sending a Fax using a One-touch Number	50
Speed Dialing	51
Storing a Number for Speed Dialing	51
Sending a Fax using a Speed Number	51
Group Dialing	52
Setting a Group Dial Number	52
Editing Group Dial Numbers	53
Sending a Fax Using Group Dialing (Multi-address Transmission)	53
Searching for a Number in the Memory	54
Searching Sequentially through the Memory	54
Searching with a Particular First Letter	54
Printing a Phonebook List	54
Advanced Fax Functions	56
Sending Broadcasting Faxes	57
Sending a Delayed Fax	57
Sending a Priority Fax	59
Polling a Remote Machine	59
Adding Documents to a Scheduled Fax	61
Canceling a Scheduled Fax	61
Additional Features	62
Using Secure Receiving Mode	63
Printing Reports	64
Using Advanced Fax Settings	65
Changing Setting Options	65
Advanced Fax Setting Options	66
Maintenance	68
Clearing the Memory	69
Adjusting Shading	70
Cleaning Your Machine	70
Cleaning the Outside	70
Cleaning the Inside	70
Cleaning the Scan Unit	71
Maintaining the Toner Cartridge	73
Redistributing Toner	73
Replacing the Toner Cartridge	74
Setting the Notify Toner Option	74
Cleaning the Drum	74
Ignoring the Toner Empty Message	75
Consumables and Replacement Parts	75
Replacing the ADF Rubber Pad	76
Troubleshooting	78
Clearing Document Jams	79
Input Misfeed	79
Exit Misfeed	79
Clearing Paper Jams	80
In the Paper Tray	80
In the Paper Exit Area	80
In the Fuser Area or Around the Toner Cartridge	81
In the Manual Feeder	82
Tips for Avoiding Paper Jams	82
Clearing LCD Error Messages	82
Solving Problems	85
Paper Feeding Problems	85
Copying Problems	86
Faxing Problems	86
General Specifications	89
Copier Specifications	90
Facsimile Specifications	91
Paper Specifications	92
Overview	92
Supported Sizes of Paper	92
Guidelines for Using Paper	93
Paper Specifications	94
Paper Storage Environment	94

Match case Limit results 1 per page

ROUBLESHOOTING

6.6

[Comm. Error]

The machine has a

communication problem.

Ask the sender to try again.

CRU Fuse Error

The machine has a problem

with recognizing the new toner

cartridge.

Please contact a service

representative.

Document Jam

The loaded document has

jammed in the ADF (Automatic

Document Feeder).

Clear the document jam. See

page 6.2.

[Door Open]

The front or rear cover is not

securely latched.

Close the cover until it locks into place.

Group Not Available

You have tried to select a

group location number where

only a single location number

can be used, such as when

adding locations for a

broadcasting operation.

Just use a one-touch or speed dial

number or dial a number manually

using the number keypad.

[Incompatible]

The remote machine does not

have the requested feature,

such as a delayed

transmission.

It also occurs if the remote

machine does not have enough

memory space to complete the

operation you are attempting.

Reconfirm the remote machine’s

features.

[Jam 1] or

[No Cartridge]

The toner cartridge is not

installed.

Install the toner cartridge. See

page 1.8.

Line Busy

The remote person did not

answer or the line is already

engaged.

Try again after a few minutes.

[Line Error]

Your machine cannot connect

with the remote machine or

has lost contact because of a

problem with the phone line.

Try again. If the problem persists, wait

an hour or so for the line to clear and

try again.

Or, turn the ECM on. See page 4.6.

Load Document

You have attempted to set up a

copy or fax operation with no

document loaded.

Load a document and try again.

[Low Heat Error]

There is a problem in the fuser

unit.

Unplug the power cord and plug it back

in. If the problem persists, please

contact a service representative.

Open Heat Error

[Over Heat]

[LSU Error]

A problem has occurred in the

LSU (Laser Scanning Unit).

Unplug the power cord and plug it

back in. If the problem persists,

please call for service.

Memory Full

The memory is full.

Delete unnecessary documents,

retransmit after more memory

becomes available or split the

transmission into more than one

operation.

Display

Meaning