Samsung SL-M4580FX User Manual Ver.1.0 (English) - Page 208

Understanding display messages Messages appear on the display screen to indicate the machine's status or errors. Some error messages are shown with graphics to help you troubleshoot problem. Refer to the tables below to understand the messages and their meaning, and correct the problem, if necessary. Messages and their explanations are listed in alphabetical order. • If a message is not in the table, reboot the power and try the printing job again. If the problem persists, call for service. • When you call for service, provide the service representative with the contents of display message. • Some messages may not appear in the display depending on options or models. • [tray number] indicates the tray number. • [media type] indicates the media type. • [media size] indicates the paper size. • [error number] indicates the error number. Message Meaning Suggested solutions Did not supply enough toner. Remove seal tape of toner cartridge or shake it. Call for service if the problem persists The machine cannot detect a toner cartridge. Or the seal tape was not removed from the toner cartridge. Remove the sealing tape from the toner cartridge. Refer to Quick Install Guide. Message Meaning Suggested solutions End of life. Replace with new imaging unit The indicated imaging unit has reached its estimated imaging unit lifea. Replace the imaging unit with a Samsung-genuine imaging unit (see "Replacing the imaging unit" on page 189). End of life. Replace with new toner cartridge The indicated toner cartridge has reached its estimated cartridge lifea. Replace the toner cartridge with a Samsunggenuine toner cartridgeb (see "Replacing the toner cartridge" on page 187). Engine System Failure [error number]. Turn off then on. There is a problem in the engine system. Engine Failure [error number]. Call for service if the problem persists. Turn the machine off and back on again. If the problem persists, call for service. Fan Failure: [error number]. Turn off then on. Call for service if the problem persists. There is a problem in the fan system. Turn the machine off and back on again. If the problem persists, call for service. Front door is open. Close The door is not it. securely latched. Close the door until it locks into place. 9. Troubleshooting 208