Samsung SL-M4580FX User Manual Ver.1.0 (English) - Page 305
Network settings configuring TCP/IP
View all Samsung SL-M4580FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 305 highlights
Network settings (configuring TCP/IP) When you connect your machine to a network, you must first configure the TCP/ IP settings for the machine. The settings shown below are the basic settings required for using your machine as a network machine. You can set TCP/IP, DNS server, TCP/IPv6, Ethernet, and IP address allocation methods. 1 Ethernet Tap Settings > Network Settings > Ethernet > TCP/IPv4 from the home screen or Apps. You can also use this feature from the SyncThru™ Web Service. Open the Web browser from your networked computer and type the IP address of your machine (see "Settings tab" on page 162). You can set ethernet settings. Tap Settings > Network Settings > Ethernet from the home screen or Apps. You can also use this feature from the SyncThru™ Web Service. Open the Web browser from your networked computer and type the IP address of your machine (see "Settings tab" on page 162). • Ethernet Port: You can enable/disable ethernet port. • Ethernet Speed: Choose the speed rate of ethernet. • MAC Address: Shows the Mac address of the machine. 2 TCP/IP Protocol You can set IPv4 settings. IP Setting You can choose the method for allocating IP addresses. • Static: Select to enter IP address/Subnet Mask/ Gateway Address manually. • BOOTP: IP address/Subnet Mask/ Gateway Address are automatically allocated by the BOOTP Server. • DHCP: IP address/Subnet Mask/ Gateway Address are automatically allocated by the DHCP Server. DNS Configuration You can configure the DNS server. • Host Name: Enter the host name. You can enter up to 63 characters. Default name is "SEC[MAC address]". • Domain Name: Enter the domain name. You can enter up to 128 characters. 3. Network Setup 306