Samsung TL110 User Manual (user Manual) (ver.1.1) (English) - Page 95

Before contacting a service center

Page 95 highlights

Before contacting a service center Please check the following The camera doesn't switch on åThere is low battery capacity à Insert a charged battery or recharge the battery (p.15) åBattery is inserted incorrectly with the polarities reversed à Insert the battery according to the polarity marks (+, -) The camera power ceases while in use åThe battery is exhausted à Insert a charged battery or recharge the battery (p.15) åThe Camera is turned off automatically à Turn on the camera power again åOperation has ceased in a low temperature outside of the camera usage temperature range à Make the camera and battery warm by placing them in your pocket, etc. and then immediately before shooting, place the battery in the camera and then shoot Camera does not take images when pressing the Shutter button åThere is insufficient memory capacity à Delete unnecessary image files åThe memory card has not been formatted à Format the memory card (p.61) åThe memory card is exhausted à Insert a new memory card åThe camera's power is off à Turn the camera power on åThe battery is exhausted à Insert a charged battery or recharge the battery (p.15) åBattery is inserted incorrectly with the polarities reversed à Insert the battery according to the polarity marks (+, -) The camera suddenly stops working while in use åThe camera stopped due to a malfunction à Remove /re-insert battery and switch the camera on The images are unclear åA picture was taken of the subject without setting an appropriate macro mode à Select an appropriate macro mode to take a clear image åTaking a picture beyond the flash range à Take a picture within the flash range åThe lens is smudged or dirty à Clean the lens 94

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109

94
Before contacting a service center
The camera doesn’t switch on
±
There is low battery capacity
³
Insert a charged battery or recharge the battery (p.15)
±
Battery is inserted incorrectly with the polarities reversed
³
Insert the battery according to the polarity marks (+, -)
The camera power ceases while in use
±
The battery is exhausted
³
Insert a charged battery or recharge the battery (p.15)
±
The Camera is turned off automatically
³
Turn on the camera power again
±
Operation has ceased in a low temperature outside of the camera
usage temperature range
³
Make the camera and battery warm by placing them in your
pocket, etc. and then immediately before shooting, place the
battery in the camera and then shoot
Please check the following
Camera does not take images when pressing the Shutter button
±
There is insufficient memory capacity
³
Delete unnecessary image files
±
The memory card has not been formatted
³
Format the memory card (p.61)
±
The memory card is exhausted
³
Insert a new memory card
±
The camera's power is off
³
Turn the camera power on
±
The battery is exhausted
³
Insert a charged battery or recharge the battery (p.15)
±
Battery is inserted incorrectly with the polarities reversed
³
Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
±
The camera stopped due to a malfunction
³
Remove /re-insert battery and switch the camera on
The images are unclear
±
A picture was taken of the subject without setting an appropriate
macro mode
³
Select an appropriate macro mode to take a clear image
±
Taking a picture beyond the flash range
³
Take a picture within the flash range
±
The lens is smudged or dirty
³
Clean the lens