Sanyo PLC XU78 Owners Manual
Sanyo PLC XU78 - XGA LCD Projector Manual
 |
UPC - 086483068287
View all Sanyo PLC XU78 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PLC XU78 manual content summary:
- Sanyo PLC XU78 | Owners Manual - Page 1
Multimedia Projector MODEL PLC-XU75 PLC-XU78 Owner's Manual - Sanyo PLC XU78 | Owners Manual - Page 2
can lock the operation on the projector and the remote control. Also you can prevent unauthorized persons from using the projector. ◆ Input Search Function Input signal can be searched automatically. (p.46) ✔ Note: • The On-Screen Menu and figures in this manual may differ slightly from the product - Sanyo PLC XU78 | Owners Manual - Page 3
Lens 54 Cleaning the Projector Cabinet 54 Lamp Replacement 55 Lamp Replacement Counter 56 Appendix 57 Troubleshooting 57 Menu Tree 59 Indicators and Projector Condition 61 Compatible Computer Specifications 62 Technical Specifications 63 Optional Parts 64 Configurations - Sanyo PLC XU78 | Owners Manual - Page 4
problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING - Sanyo PLC XU78 | Owners Manual - Page 5
, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons. Upon completion of any service or repairs to this projector, ask the - Sanyo PLC XU78 | Owners Manual - Page 6
covered. Installing the Projector in Proper Position Install the projector properly. Improper Installation may reduce the lamp life and cause a Projector When moving the projector, replace the lens cover and retract the adjustable feet to prevent damage to the lens and cabinet. When the projector - Sanyo PLC XU78 | Owners Manual - Page 7
the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number : PLC-XU75/PLC-XU78 Trade Name : Sanyo Responsible party : SANYO FISHER COMPANY Address : 21605 Plummer Street - Sanyo PLC XU78 | Owners Manual - Page 8
Do not put heat-sensitive objects near this side. !2 Lamp Cover !3 Air Intake Vents (back and bottom) !4 Air Filters !5 Adjustable Feet ✽ Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector. *Kensington is a registered trademark of ACCO Brands Corporation - Sanyo PLC XU78 | Owners Manual - Page 9
Rear Terminal q w Part Names and Functions e r ty i u q SERVICE PORT This jack is used to service the projector. w COMPUTER IN 1/COMPONENT IN Connect output signal from a computer, RGB scart 21-pin video output, or component video output to this terminal. (p15, 17) When - Sanyo PLC XU78 | Owners Manual - Page 10
Part Names and Functions Top Control y t u r i e w o q q SELECT button - Execute the selected item. the projector is in the stand-by mode. It remains green while the projector is under operation. (p.18, 19, 61) t LAMP REPLACE indicator Turn yellow when the life of the projection lamp - Sanyo PLC XU78 | Owners Manual - Page 11
Remote Control ew q r t y u io !0 Part Names and Functions q POWER ON/STAND-BY button Turn the projector on or off. (p.18, 19) w button Temporarily turn off the image on the screen. (p.24) !2 !0 LAMP CONTROL button Select the lamp mode. (p.24, 48) !1 !1 MUTE button Mute the sound. (p. - Sanyo PLC XU78 | Owners Manual - Page 12
and install new batteries. ● Risk of explosion if a battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. Operating Range Point the remote control toward the projector (Infrared Remote Receiver) when pressing any button. Maximum operating range for the - Sanyo PLC XU78 | Owners Manual - Page 13
the adjustable feet and rotate the adjustable feet to adjust the position and tilt. 3 To retract the adjustable feet, lift the front of the projector and press and undo the feet lock latches. Keystone distortion of the projected image can be corrected by menu operation. (p.22, 42) Adjustable - Sanyo PLC XU78 | Owners Manual - Page 14
not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power being supplied. Connect the projector with all peripheral equipment before turning the projector on. (See pages 15-17 for connection.) Connect the AC power cord - Sanyo PLC XU78 | Owners Manual - Page 15
the COMPUTER IN 1/COMPONENT IN and the COMPUTER IN 2/ MONITOR OUT terminal as input. • When connecting the AUDIO OUT to external audio equipment, the projector's built-in speaker is disconnected. • When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1/ COMPONENT IN and - Sanyo PLC XU78 | Owners Manual - Page 16
for connection • Video and Audio Cable (RCA x 3) • S-VIDEO Cable • Audio Cable (Mini Plug: stereo) ( Cables are not supplied with the projector.) S-Video Output Composite Video and Audio Output (R) (L) (Video) S-Video cable External Audio Equipment Video and audio cable Audio Input S-VIDEO - Sanyo PLC XU78 | Owners Manual - Page 17
for connection • Audio Cables (Mini Plug :stereo) • Scart-VGA Cable • Component Cable • Component-VGA Cable ( Cables are not supplied with the projector.) Installation Audio Output RGB Scart 21-pin Output Component Video Output (Y, Pb/Cb, Pr/Cr) Audio cable (stereo) Scart-VGA cable Component - Sanyo PLC XU78 | Owners Manual - Page 18
with a computer, VCR, etc.) before turning on the projector. 2 Connect the projector's AC power cord into an AC outlet. The POWER indicator becomes red. 3 Press the POWER ON/STAND-BY button on the top control or on the remote control. The POWER indicator becomes green and the cooling fans start - Sanyo PLC XU78 | Owners Manual - Page 19
control or on the remote control, and a message "Power off?" appears on the screen. 2 Press the POWER ON/STAND-BY button again to turn off the projector THE PROJECTOR C O N T I N U O U S LY W I T H O U T R E S T. CONTINUOUS USE MAT RESULT IN SHORTENTING THE LAMP LIFE.TURN OFF THE PROJECTOR AND - Sanyo PLC XU78 | Owners Manual - Page 20
Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen is not active until the SELECT button is pressed. Top Control POINT buttons (outer ring) MENU button SELECT button Remote Control MENU button POINT buttons SELECT button On-Screen Menu Menu - Sanyo PLC XU78 | Owners Manual - Page 21
see Menu Tree on p.59,60. For computer source Guide Window Show the selected Menu of the On-Screen Menu. / Full screen / Digital zoom +/-] (p.32, 34) Setting Menu Used to set the projector's operating configurations. (p.42-51) Input Menu Used to select input source either Computer or Video - Sanyo PLC XU78 | Owners Manual - Page 22
If a projected picture has keystone distortion, correct the image with Keystone adjustment. Press the KEYSTONE button on the top control or on the remote control. The keystone dialog box appears. Correct keystone distortion by pressing the Point ed buttons. Keystone adjustment can be memorized - Sanyo PLC XU78 | Owners Manual - Page 23
previous level, press the MUTE button again or press the VOLUME +/- buttons. Mute function is also effective for AUDIO OUT jack. Top Control Remote Control VOLUME+/buttons VOL- button VOL+ button Menu Operation 1 Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons - Sanyo PLC XU78 | Owners Manual - Page 24
. Normal. . . normal brightness Auto. . . . . brightness according with the input signal Eco lower brightness reduces the lamp power consumption and extends the lamp life. Remote Control VOLUME +/- buttons (See p.23.) KEYSTONE button (See p.22) POINT ed buttons AUTO PC button D.ZOOM buttons - Sanyo PLC XU78 | Owners Manual - Page 25
Input Source Selection Direct Operation Choose either Computer 1 or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. Top - Sanyo PLC XU78 | Owners Manual - Page 26
XGA, SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this projector the connection between your computer and the projector. (See "Troubleshooting" on page 57.) Mode 1 The preset system is manually adjusted in the PC Adjust Menu. The - Sanyo PLC XU78 | Owners Manual - Page 27
the AUTO PC button on the remote control unit. Remote Control AUTO PC button Menu Operation Auto Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, the setting can image is not provided properly with this operation, manual adjustments are required. (p.28, 29) • - Sanyo PLC XU78 | Owners Manual - Page 28
enables you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen Menu. Press - Sanyo PLC XU78 | Owners Manual - Page 29
. Press the Point 7 8 buttons to decrease/increase the value. Display area V Adjust the vertical area displayed by this projector. Press the Point 7 8 buttons to decrease/increase the value. Reset To reset the adjusted data, select Reset and press the SELECT button. The confirmation box - Sanyo PLC XU78 | Owners Manual - Page 30
preset on this projector. Real Picture level with improved halftone for graphics. Blackboard (Green) Picture level suitable for the image projected on a blackboard. See above for further description. Image 1 ~ 4 User preset image in the Image Adjust Menu. (p.32) 30 Remote Control IMAGE button - Sanyo PLC XU78 | Owners Manual - Page 31
Computer Input Image Level Adjustment 1 Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Image Adjust Menu icon. 2 Press the Point ed buttons to move the red framed pointer to the item that you want to adjust, and then - Sanyo PLC XU78 | Owners Manual - Page 32
than 1600x1200. If your computer's screen resolution is higher than it, reset the resolution to the lower before connecting to the projector. • The image data in other than XGA (1024x768) is modified to fit the screen size in initial mode. • True, Full screen, and Digital zoom +/- cannot be selected - Sanyo PLC XU78 | Owners Manual - Page 33
Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds and then the Aspect dialog - Sanyo PLC XU78 | Owners Manual - Page 34
zoom -" is displayed. Press the SELECT button to compress image size. A projected image can be also compressed by pressing the D.ZOOM d button on the remote control. To exit the Digital zoom +/- mode, press any button except the D.ZOOM ed buttons, SELECT, and Point buttons. To return to the previous - Sanyo PLC XU78 | Owners Manual - Page 35
1 Computer 2 ✳ ✳ See Note at the bottom of this page. Remote Control VIDEO button Menu Operation 1 Press the MENU button to display the On- Auto, the projector automatically detects the incoming video signal, and adjusts itself to optimize its performance. The projector selects a connection - Sanyo PLC XU78 | Owners Manual - Page 36
Source Selection (Component, RGB Scart 21-pin) Direct Operation Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. Top - Sanyo PLC XU78 | Owners Manual - Page 37
to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. AV - Sanyo PLC XU78 | Owners Manual - Page 38
on this projector. Cinema Picture level adjusted for the picture with fine tone. Blackboard (Green) Picture level suitable for the image projected on a blackboard. See above for further description. Image 1~4 User preset image in the Image Adjust Menu (p.39, 40). 38 Remote Control IMAGE button - Sanyo PLC XU78 | Owners Manual - Page 39
Video Input Image Level Adjustment 1 Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Image Adjust Menu icon. 2 Press the Point ed buttons to move the red framed pointer to the item that you want to adjust, and then press - Sanyo PLC XU78 | Owners Manual - Page 40
Select "L1" for an active picture. L2 . . . . Select "L2" for a still picture. Film . . . Select "Film" for watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the SELECT button. The - Sanyo PLC XU78 | Owners Manual - Page 41
Video Input Screen Size Adjustment This projector has the picture screen resize function, which Provide the image at a wide screen ratio of 16:9. Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the - Sanyo PLC XU78 | Owners Manual - Page 42
Setting Setting This projector has Setting menu that allows you to set up the other various functions described as follows: 1 Press the MENU button to display the On-Screen - Sanyo PLC XU78 | Owners Manual - Page 43
of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off Do not decides the start-up display as follows: User . . . . the image you captured Default . . the factory-set - Sanyo PLC XU78 | Owners Manual - Page 44
Logo select function and set it to "User". Then the captured image is displayed when turning on the projector next time or pressing the NO SHOW button . (p.30, 38.) • A signal from a computer can be captured up to XGA (1024x768). A signal from video equipment can be captured except for 720p, 1035i, - Sanyo PLC XU78 | Owners Manual - Page 45
could no longer change the Logo PIN code setting. For details on PIN code setting, refer to relevant instructions of the PIN code lock function on pages 49 and 50. caution: when you have changed THE LOGO . should the LOGO pin code be lost or forgotten , the pro j ector can no longer be operated. 45 - Sanyo PLC XU78 | Owners Manual - Page 46
the image from a ceiling mounting the projector. Ceiling Rear When this function Lamp are displayed every time the signal is switched. • Only the input source selected at the last time can be detected. • If any of the INPUT button on the top control or COMPUTER/VIDEO button on the remote control - Sanyo PLC XU78 | Owners Manual - Page 47
as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used for a signal is reconnected or any button on the top control or remote control is pressed. Shut down . . . . . When the lamp has been fully cooled down, the power is - Sanyo PLC XU78 | Owners Manual - Page 48
brightness Auto brightness according with the input signal Eco lower brightness reduces the lamp power consumption and extends the lamp life. Remote control This projector provides two different remote control codes: the factory-set initial code (Code 1) and the secondary code (Code 2). This - Sanyo PLC XU78 | Owners Manual - Page 49
remote control. lock the operation of the remote control. To unlock, use the top control. If the top control accidentally becomes locked and you do not have the romote control or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service - Sanyo PLC XU78 | Owners Manual - Page 50
new pin code in column of the pin code no. memo on page 66, and keep it securely. If you forget your PIN code, the projector can no longer be started. Enter a PIN code The input numbers change to "✳" for security. Move the pointer to "Set" by pressing the Point 8 button - Sanyo PLC XU78 | Owners Manual - Page 51
-sound than the normal operation (L1), but it takes longer to cool the projector down. Lamp counter This function is used to reset the lamp replacement counter. When replacing the projection lamp, reset the lamp replacement counter by using this function. See page 56 for operation. Factory default - Sanyo PLC XU78 | Owners Manual - Page 52
Top Control WARNING Temp. blinking red The projector is shut down and the WARNING TEMP. indicator emits a red light. When the projector detects the AC power cord and contact the service station for check and repair. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER - Sanyo PLC XU78 | Owners Manual - Page 53
and adversely affect the life of the projector. Clean the air filters following the steps below. 1 Turn off the projector, and disconnect the AC service station for proper cleaning. Attaching the Lens Cover When moving this projector or while not using it over an extended period of time, replace - Sanyo PLC XU78 | Owners Manual - Page 54
. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface. 3 When the projector is not in use, replace the lens cover. Cleaning the Projector Cabinet Follow these steps to clean the projector cabinet. 1 Disconnect the AC power cord before cleaning. 2 Softly wipe the - Sanyo PLC XU78 | Owners Manual - Page 55
page . Screw Handle Screw ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector : PLC-XU75 / PLC-XU78 ● Replacement Lamp Type No. Service Parts No. : POA-LMP115 - Sanyo PLC XU78 | Owners Manual - Page 56
the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator - Sanyo PLC XU78 | Owners Manual - Page 57
Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. - Make sure you have properly connected the projector for the monitor output when connecting to a projector. See your computer's instruction manual for the setting. - It takes about 30 seconds - Sanyo PLC XU78 | Owners Manual - Page 58
top control of the projector. (See page 49) WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Give the model - Sanyo PLC XU78 | Owners Manual - Page 59
Menu Tree Computer Input/Video Input Input Computer 1 Computer 2 Video Sound Sound Computer Input System (1) Volume Mute Quit RGB Component RGB (Scart) Quit Auto Video S-Video Quit 0 - 63 On/Off Mode 1 Mode 2 SVGA 1 - - - - Image Select ✽ Systems displayed in the System Menu vary - Sanyo PLC XU78 | Owners Manual - Page 60
Common Reset H/V Yes/No Yes/No Quit Language Keystone Blue back Display Logo Ceiling Rear Input search Terminal Power management On start Lamp control Remote control Security Fan Lamp counter Factory default Quit English German French Italian Spanish Portuguese Dutch Swedish Finnish Polish - Sanyo PLC XU78 | Owners Manual - Page 61
dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard. • • • green • • • red • • • off • • • blinks green • • • blinks red ✽When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights - Sanyo PLC XU78 | Owners Manual - Page 62
Appendix Compatible Computer Specifications Basically this projector can accept the 1024 x 768 1024 x 768 XGA 6 XGA 7 XGA 8 1024 x 768 1024 x 768 1024 x 768 XGA 9 XGA 10 XGA 11 1024 x 768 1024 x 768 1024 x 768 XGA 12 XGA 13 XGA 14 1024 x 768 1024 x 768 1024 x 768 XGA 15 MAC 19 1024 x 768 - Sanyo PLC XU78 | Owners Manual - Page 63
Projection Image Size (Diagonal) Projection Lens Throw Distance Projection Lamp Adjustable from 40" to 300" F 1.65 ~ 1.81 lens with f 22.5 mm ~ 27 mm with manual zoom and focus 4.6' ~ 41.3' (1.4 m ~ 12.6 m) PLC-XU75: 200W PLC-XU78: 220W Interface Video Input Jack S-Video Input Jack Audio - Sanyo PLC XU78 | Owners Manual - Page 64
Appendix Accessories Owner's Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable Lens Cover with String PIN Code Label Lamp Replacement Label ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible - Sanyo PLC XU78 | Owners Manual - Page 65
sync.) 6 Ground (Red) 14 Vert. sync. 7 Ground (Green) 15 DDC clock 8 Ground (Blue) SERVICE PORT CONNECTOR Terminal: Mini DIN 8-PIN 876 5 43 1 Dimensions Serial 1 RXD 2 ----3 ----4 GND 5 RTS/CTS 6 TXD 7 GND 8 GND Unit: inch(mm) Screw Holes for Ceiling Mount Screw: M4 Depth: 0.394(10.0) 65 - Sanyo PLC XU78 | Owners Manual - Page 66
prominent place of the projector's body while it is locked with a PIN code. Lamp Replacement Label When using the projector ceiling-mounted, put the Lamp replacement label (supplied) on in a prominent place of the projector's body to check the Replacement Lamp Type Number. Lamp Replacement Label 66 - Sanyo PLC XU78 | Owners Manual - Page 67
KH3AC SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
 |
 |
Multimedia Projector
MODEL
PLC-XU75
Owner's Manual
PLC-XU78