Sanyo PLC-XU87 Owners Manual - Page 60
Attaching the Lens Cover, Cleaning the Projection Lens
UPC - 086483065705
View all Sanyo PLC-XU87 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Maintenance and Cleaning Attaching the Lens Cover When moving this projector or while not using it over an extended period of time, replace the lens cover. Attach the lens cover according to the following procedures. 1 Pass the string through a hole of the lens cover. 2 Turn over the projector and remove the screw with a screwdriver. 3 Attach the string with lens cover to a hole at the bottom of the projector and secure it with a screw. Cleaning the Projection Lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens. Cleaning the Projector Cabinet Unplug the AC power cord before cleaning. Gently wipe the projector body with a soft dry cleaning cloth. When the cabinet is heavily soiled, use a small amount of mild detergent and finish with a soft dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the cabinet. When the projector is not in use, put the projector in an appropriate carrying case to protect it from dust and scratches. 60 Lens Cover String for the lens cover Secure it to the hole with a screw. Hole