Sanyo PLC-XU87 Owners Manual - Page 62
Troubleshooting, Check the Ceiling/Rear function. See
UPC - 086483065705
View all Sanyo PLC-XU87 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. -Make sure you have properly connected the projector to peripheral equipment as described on pages 17-19. -Make sure all equipment is connected to AC outlet and the power is turned on. -When the projector does not project an image from the connected computer, restart the computer. Problem: No power Image is out of focus. No image Image is Left/Right reversed. Image is Top/Bottom reversed. No sound - Solutions - Plug the power cord of the projector into the AC outlet. - See if the POWER indicator lights red. - Wait until the POWER indicator stops blinking to turn on the projector again. The projector can be turned on after the POWER indicator turns red. See page 21. - Check the WARNING indicator. If the WARNING indicator lights red, projector cannot be turned on. See page 56. - Check the projection lamp. See page 58. - Unlock the Key lock function for the projector. See page 52. - Adjust focus of the projector. See page 25. - Provide proper distance between the projector and the projection screen. See page 16. - Check the projection lens to see if it needs cleaning. See page 60. - Moving the projector from a cool to warm place may result in moisture condensation on the projection lens. In such cases, leave the projector off and wait until condensation evaporates. - Check the connection between your computer or video equipment and the projector. See pages 17-19. - See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connecting to a projector. See your computer's instruction manual for the setting. - It takes about 30 seconds to display an image after turning on the projector. See page 21. - See if the selected system is corresponding with your computer or video equipment. See pages 30, 40. - Select correct input source once again through menu operation. See pages 28-29, 38-39. - Make sure the temperature is not out of the specified Operating Temperature (41˚F-95˚F [5˚C-35˚C]). - Check the Ceiling/Rear function. See page 49. - Check the Ceiling function. See page 49. - Check the audio cable connection from audio input source. - Adjust the audio source. - Press the Volume + button. See page 25. - Press the Mute button. See page 25. 62