Sanyo PLV Z700 Owners Manual
Sanyo PLV Z700 - LCD Projector - 1200 ANSI Lumens Manual
 |
UPC - 086483072420
View all Sanyo PLV Z700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PLV Z700 manual content summary:
- Sanyo PLV Z700 | Owners Manual - Page 1
Multimedia Projector MODEL PLV-Z700 Owner's Manual - Sanyo PLV Z700 | Owners Manual - Page 2
an image for the screen logo and use it for the starting-up display or between presentations. ◆ Lamp Control The brightness of the projection lamp can be selected (see pages 23, 29). ◆ Simple Computer System Setting The Multi-scan system of the projector conforms to almost all computer output - Sanyo PLV Z700 | Owners Manual - Page 3
Setting 37 Information 43 Input Source Information Display 43 Maintenance and Cleaning 44 Warning Indicator 44 Cleaning the RGB panels 45 Cleaning the Air Filter 47 Resetting the Filter Counter 48 Cleaning the Projection Lens 48 Cleaning the Projector Cabinet 48 Lamp Replacement - Sanyo PLV Z700 | Owners Manual - Page 4
manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER - Sanyo PLV Z700 | Owners Manual - Page 5
has been dropped or the cabinet has been damaged. f. When the projector exhibits a distinct change in performance, this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same - Sanyo PLV Z700 | Owners Manual - Page 6
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR - Do not drop or bump the projector, otherwise damages or malfunctions may result. - When carrying the projector, use a suitable carrying case. - Do not transport the projector by courier or any other transport service in an unsuitable transport case - Sanyo PLV Z700 | Owners Manual - Page 7
: PLV-Z700 : Sanyo : SANYO FISHER COMPANY : 21605 Plummer Street, Chatsworth, California 91311 : (818)998-7322 AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada: AC - Sanyo PLV Z700 | Owners Manual - Page 8
and Connectors !2 Main On/Off Switch !3 Power Cord Connector !4 Air Intake Vent !5 Lamp Cover ✽ Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector. *Kensington is a registered trademark of ACCO Brands Corporation. !6 Adjustable Feet !7 RGB Panel - Sanyo PLV Z700 | Owners Manual - Page 9
output signal to these jacks (p.15). r SERVICE PORT This jack is used to service the projector. t HDMI 1/HDMI 2* Connect the HDMI output signal from video equipment to these terminals (p.16). y VIDEO Connect the composite video output signal from video equipment to this jack (p.15). * Note on - Sanyo PLV Z700 | Owners Manual - Page 10
Execute the item selected or use it to access the submenu items (p.20). i INFO. button Display the input source information (p.43). e LAMP REPLACE indicator Lights yellow light when the projection lamp reaches its end of life (pp.49, 53). o POWER ON/STAND-BY button Turn the projector on or off (pp - Sanyo PLV Z700 | Owners Manual - Page 11
Functions q POWER ON/STAND-BY button Turn the projector on or off (pp.18, 19). w RESET button Reset to the previous figure. This function is limited to when selecting the Image Adjustment (pp.28 - 33) and Picture Adjustment (p.34). e LIGHT button Light up the remote control buttons for about 10 - Sanyo PLV Z700 | Owners Manual - Page 12
code (Code 1) (p.41). To ensure safe operation, please observe the following precautions: ● Use two (2) AA or LR6 type alkaline batteries. ● Always replace batteries in sets. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid. ● Do not expose the remote control to - Sanyo PLV Z700 | Owners Manual - Page 13
to limit ambient lighting in order to obtain the best image. • All measurements are approximate and may vary from the actual sizes. Adjustable Feet Projection angle can be adjusted up to 6.5 degrees with the adjustable feet. 1 Rotate the adjustable feet and tilt the projector to the proper - Sanyo PLV Z700 | Owners Manual - Page 14
and down or left and right manually with the Lens Shift Rings, Lens Shift (Left/Right) 1/2W W 1/2W W Before using the Lens Shift Rings, make sure that this lock is released V rightmost V V uppermost V downmost ✔Note: • The best image is generally obtained at the central axis of the lens - Sanyo PLV Z700 | Owners Manual - Page 15
This projector can be connected up to six equipment at one time. See the figures below for the connections. Connecting to Video Equipment (Video, S-Video) Video, S-video Use a video cable or a S-video cable (commercially available). Video Equipment Composite Video Output S-VIDEO Output Video - Sanyo PLV Z700 | Owners Manual - Page 16
cable (optional) for HDMI output. RGB Scart Use a Scart-VGA cable (optional). Video Equipment Video Equipment HDMI Video Output RGB Scart 21-pin Output HDMI Cable Scart-VGA Cable HDMI COMPUTER Connecting to a Computer Computer (Analog) Use a VGA cable (commercially available) or a DVI-VGA - Sanyo PLV Z700 | Owners Manual - Page 17
power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning it on. used. If the supplied AC power cord does not match your AC outlet, contact your sales dealer. Projector side AC Outlet side For the U.S.A. and Canada - Sanyo PLV Z700 | Owners Manual - Page 18
look dark for a while after turning on the projector. Lamp needs some time to stabilize after the power is turned on. Stored lamp mode and the image mode will be active after the lamp is stabilized. • When the shutter is manually closed slightly during projection, the shutter will be automatically - Sanyo PLV Z700 | Owners Manual - Page 19
SHORTENING LAMP LIFE. DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR inside the projector. • If the WARNING indicator blinks or emits red light, see "Warning Indicator" on page 44. • Do not put the projector in a - Sanyo PLV Z700 | Owners Manual - Page 20
which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. 1 Press the MENU button on the top control or on the remote control to display the On-Screen Menu. 2 Use the Point ed buttons to highlight or select a main menu item - Sanyo PLV Z700 | Owners Manual - Page 21
, Fan control, Lamp counter reset, Service port, and Factory default (pp.37 - 42). u Information Display the input source information: Input source, Signal, H-sync freq., V-sync freq., Deep color, Image mode, Screen size, Lamp status, Lamp time and Filter time (p.43). i Guide The key operation - Sanyo PLV Z700 | Owners Manual - Page 22
operations, using the remote control is advisable. Just pressing one of the buttons enables you to have the desired operation quickly, and no need for calling up the On-Screen Menu. LIGHT button Press the LIGHT button to light up the remote control buttons. The light is automatically turned off - Sanyo PLV Z700 | Owners Manual - Page 23
button to display the Color adjustment bar and use the Point 7 8 buttons to adjust the setting value. Press the MENU button after adjusting. and lower-sound than Auto 1. Eco Lower brightness reduces the lamp power consumption. The lamp mode is automatically switched to "Eco" under no signal input. - Sanyo PLV Z700 | Owners Manual - Page 24
Top Control ✔Note: • Before selecting an input source with these buttons, each input must be set on a proper signal form via menu operation (see on pages 25 - 26). INPUT button INPUT button Video S-video Component 1 Component 2 HDMI 1 HDMI 2 Computer INPUT buttons on the remote control Press the - Sanyo PLV Z700 | Owners Manual - Page 25
Menu. 6 Use the Point ed buttons to select the desired source and press the Point 8 or OK buttons. Input Menu Input The currently set item is check marked. Video or S-Video When the video signal is connected to the VIDEO or S-VIDEO jacks, select Video or S-video respectively. Auto The projector - Sanyo PLV Z700 | Owners Manual - Page 26
performance. If the output signal of video equipment and the input signal of the projector do not match, you might not get an image with the best quality. If the blacks of the picture appears unclear (too dark or too light), try "HDMI 1 setup" or "HDMI 2 setup" in the Setting Menu on page 38. ✔Note - Sanyo PLV Z700 | Owners Manual - Page 27
pressed, the User submenu with a check mark on the currently set image mode appears. Use the Point ed buttons to select the desired image mode and 3D images in a dark room. Natural For viewing images faithfully reproduced without any control by the projector in a dark room. Living For viewing video - Sanyo PLV Z700 | Owners Manual - Page 28
the projector 3 Use the Point 7 8 buttons to adjust the setting values Lamp control ➜ Gamma ➜ Progressive ➜ Noise reduction ➜ Iris mode ➜ Iris range ➜ Auto black stretch➜ Contrast enhancement ➜ Transient improvement ➜ Color management ➜ Dynamic gamma ➜ 3D-Y/C ➜ Custom gamma ➜ Brightness ✔Note: • 3D - Sanyo PLV Z700 | Owners Manual - Page 29
lamp power consumption. The lamp mode is automatically switched to "Eco" under no signal input. Gamma Use video signal format is 1080p. The selected item. Press the Point 8 or OK buttons to access the selected item. The adjustment bar is displayed. Use the Point 7 8 buttons to adjust the setting - Sanyo PLV Z700 | Owners Manual - Page 30
prioritized over brightness Fixed Fixed lamp aperture set in the Iris range Iris range Adjust the upper limit of the lamp aperture (from -63 to access the selected item. The adjustment bar is displayed. Use the Point 7 8 buttons to adjust the setting values and press the OK button. If you press the - Sanyo PLV Z700 | Owners Manual - Page 31
7 8 buttons to change the 3D-Y/C mode. Off 3D-Y/C mode is "Off" On 3D-Y/C mode is "On" ✔Note: • 3D-Y/C may not appear depending on the pointer remains where the adjustment is made. • The values are set to 0 when no adjustment is made. Use the Point 7 8 buttons to move the colored gamma pointer - Sanyo PLV Z700 | Owners Manual - Page 32
SELECTION Press the OK button when "COLOR M." in the Color management list is selected. The Color management list disappears and the Color management pointer appears. Use the Point ed 7 8 buttons to move the pointer to a spot where you want to adjust the color and then press the OK button. The image - Sanyo PLV Z700 | Owners Manual - Page 33
press the Point 8 or OK buttons. The User Image Mode Menu appears. Use the Point ed buttons to choose one of the five (5) user image modes and 27) or turn off the POWER without storing adjusted settings, all the adjusted settings will be reset. • When resetting, the adjusted data in Advanced menu - Sanyo PLV Z700 | Owners Manual - Page 34
projector. Picture Adjustment enables you to precisely adjust several parameters manually to match those signal formats. The parameters manually cannot be operated with the video input, some incompatible computer bar is displayed. Use the Point 7 8 buttons to adjust the setting values and press the - Sanyo PLV Z700 | Owners Manual - Page 35
press the Point 8 or OK buttons. The selected item is check marked. Full Fit the image to the screen by expanding the width of the image uniformly. This function can be used to project a squeezed video signal at the wide video aspect ratio of 16:9. Zoom Fit the image to the screen size (16 - Sanyo PLV Z700 | Owners Manual - Page 36
buttons to display the Vertical adj. dialog box. Use the Point ed buttons to adjust the vertical eJɾze)Q -# Ϩλ4ʔ:3ϘοΫεʣ ݩ Composite / S-video/ Composite / S-video/ Cinesco ͷ 480i / 480p / display) ৴ ߸ớ ը ૾ Ờ subtitles subtitles Full ϑ ϧ subtitles subtitles Zoom Normal ζ ồ - Sanyo PLV Z700 | Owners Manual - Page 37
select the desired position and press the OK button. Ceiling When this function is set to "On," the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Press the Point 8 or OK buttons to switch On/Off. Language Press the Point - Sanyo PLV Z700 | Owners Manual - Page 38
STANDARD." Enhanced ��� When the output of video equipment is set to "ENHANCED." The names for the output setting of video equipment vary from equipment to equipment. For details, refer to the owner's manual of video equipment. Highland When using the projector in high altitudes (about 1,200 meters - Sanyo PLV Z700 | Owners Manual - Page 39
Setting Rename This function is used to change the name of the Input or the User image. Select Rename and press the Point 8 or OK buttons. The Rename window appears. Use Point 8 or OK buttons. The Rename window appears. RENAME WINDOW Use the Point ed buttons to select Input or User image and Press - Sanyo PLV Z700 | Owners Manual - Page 40
this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option. Countdown Off ��� Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible - Sanyo PLV Z700 | Owners Manual - Page 41
Setting Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used • When the batteries of the remote control are replaced, the remote control code automatically returns to the - Sanyo PLV Z700 | Owners Manual - Page 42
replacing the projection lamp, reset the lamp replacement counter with this function. See page 50 for operation. 42 Service port For technician use ONLY. Set this function to Off. Factory default This function restores all setting values except for the user's logo, the filter counter and the lamp - Sanyo PLV Z700 | Owners Manual - Page 43
Information Menu is used for checking the status of the image signal being projected and the operation of the projector. Direct Operation Press . Lamp status The selected lamp mode is displayed. Lamp time The cumulative lamp operating time is displayed. Filter time The cumulative filter operating - Sanyo PLV Z700 | Owners Manual - Page 44
away from the duct or vent. - Is the air filter clean? Clean the air filter periodically or replace it with a new one. The projector is shut down and the WARNING indicator lights red. When the projector detects an abnormal condition, it is automatically shut down to protect the inside of the - Sanyo PLV Z700 | Owners Manual - Page 45
the Cleaning function in the Setting Menu (p.42), you can remove the dusts from the projector. ✔Note: • Dust might not be removed completely with these steps. Then contact the dealer where you purchased the projector or service center. CAUTION PROHIBITED CAUTION IN USING THE AIR BLOWER AND THE - Sanyo PLV Z700 | Owners Manual - Page 46
done, pull the blower out of the hole and replace the hole cover. 7 Set the projector back into the right position, then press any button projector. 46 Wave the nozzle back and forth inside of the projector. (Do not attempt to bend the nozzle.) Use only the supplied blower and nozzle. Do not use - Sanyo PLV Z700 | Owners Manual - Page 47
quality. When using the projector under dusty or smoky conditions, dust may accumulate on a lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper - Sanyo PLV Z700 | Owners Manual - Page 48
the Filter counter after cleaning or replacing the air filter. 1 Turn the projector on and press the MENU button to display the On-Screen Menu. Select the Setting Menu with the Point ed buttons. Press the Point 8 or OK buttons to access the submenu items. 2 Select Filter counter and then use the - Sanyo PLV Z700 | Owners Manual - Page 49
Cover Handle Screws Lamp ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector: ● Replacement Lamp Type No.: PLV-Z700 POA-LMP114 (Service Parts No. 610 - Sanyo PLV Z700 | Owners Manual - Page 50
be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator lighted may - Sanyo PLV Z700 | Owners Manual - Page 51
needs to be changed when connecting to a projector. See your computer's instruction manual for the setting. - It takes about 20 seconds to display an image after turning on the projector. - See if the selected system is corresponding to your computer or video equipment (see pages 24 - 26). - Select - Sanyo PLV Z700 | Owners Manual - Page 52
operated with the video input, some blinks or lights. Abnormal noise WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or service - Sanyo PLV Z700 | Owners Manual - Page 53
its end of life, the LAMP REPLACE indicator lights yellow. When this indicator becomes yellow, replace the projection lamp with a new one promptly. Reset the Lamp replacement counter after replacing the lamp. The time when the LAMP REPLACE indicator should light is depending on the lamp mode. See - Sanyo PLV Z700 | Owners Manual - Page 54
Video Component 1 Component 2 HDMI 1 HDMI 2 Computer Brilliant cinema Creative cinema Natural Living Dynamic User image 1 User image 5 Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N Quit RGB (Analog) RGB (Scart) Quit Image adj. Brightness Contrast Color Tint Color temp. Red Green Blue Sharpness Lamp - Sanyo PLV Z700 | Owners Manual - Page 55
480i/575i input, -15 to +15. Full Zoom Normal Natural wide Anamorphic Setting Input Signal H-sync freq. V-sync freq. Deep color Image Screen Lamp status Lamp time Filter time PAL SECAM NTSC NTSC4.43 PAL-M Test pattern Filter counter Cleaning Fan control Lamp counter reset Service Port Factory - Sanyo PLV Z700 | Owners Manual - Page 56
Appendix System Mode Chart PLV-Z700 can basically accept the signal from all computers and some video equipment with V- and H-Frequency mentioned below and less than 100 MHz of Dot images even when signals other than above are inputted, however the functions of the projector could be limited. 56 - Sanyo PLV Z700 | Owners Manual - Page 57
Lamp Video Input Jacks Computer Input Terminal HDMI Input Terminals Service Port Connector Feet Adjustment Voltage and Power Consumption Operating Temperature Storage Temperature Remote Control Multimedia Projector Accessories Owner's Manual (CD-ROM) Quick Reference Guide AC Power the LCD panels - Sanyo PLV Z700 | Owners Manual - Page 58
No. to the sales dealer. ● HDMI Cable Type No.: POA-CA-HDMI (This cable use a suitable HDMI cable commercially available.) ● Component Cable (32.8'/10m) Type No.: POA-CA-COMP10 ● Scart-VGA Cable Type No.: POA-CA-SCART (This cable is used for RGB Scart 21-Pin Video output of video - Sanyo PLV Z700 | Owners Manual - Page 59
Dimensions Unit: inch (mm) 6.5º 15.75 (400) 2.09 (53) Appendix 3.17 (80.5) 6.06 (154) 13.62 (346) 5.82 (147.9) 0.77 (19.6) 4.62 (117.3) 6.31 (160.3) 3.45 (87.7) 59 - Sanyo PLV Z700 | Owners Manual - Page 60
MF4A SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
 |
 |
Multimedia Projector
MODEL
PLV-Z700
Owner’s Manual