Sanyo VPC HD1 Instruction Manual, VPC-HD1E - Page 178
Shooting, Monitor, Viewing, images, Problem, Cause, Action
UPC - 086483059766
View all Sanyo VPC HD1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Shooting Monitor Viewing images Problem When zooming in or out, the zoom movement stops momentarily. There is noise in the captured image. The \ icon appears, and shooting is not possible. No playback image appears. The image is too dark. Cause Action The optical zoom has moved to the maximum magnification position. The ISO sensitivity setting is too high. The camera's internal temperature is high. The main switch is not set to PLAY. The flash was blocked by a finger or other object. The subject was too far away. The subject was lit from behind. There is not enough light. Not a malfunction. Release the zoom switch, and press it again. Set the ISO sensitivity to a lower setting. Discontinue shooting, and wait for the camera to cool down before using it again. Set the main switch to PLAY. Hold the camera correctly, and make sure the flash is not obstructed. Capture the image in the range of operation of the flash. Use the forced flash mode. Use the exposure correction function. Use the spot light-measuring mode. Adjust the ISO sensitivity setting. Reference page 60 83 - 43, 48 39 182 61 63 82 83 English 172