Sharp PCMM20 User Guide - Page 115
Removing from Connection Cradle
View all Sharp PCMM20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Connecting to Host Computer Again While you keep the MM series inserted in the connection cradle, slide the connection switch back to ON to connect to the host computer again. When you do not remove the MM series from the connection cradle after stopping the device, the connection is stopped, although the READY indicator is on. To regain the connection, slide the DirectHD connection switch to OFF, then back ON again. Disconnecting USB Cable When disconnecting the USB cable from the host computer and the connection cradle, be sure to stop the device before disconnecting the cable. Removing from Connection Cradle To remove the MM series from the connection cradle, follow the steps below: 1. Stop the device first. Be sure to stop the device before removing the MM series from the connection cradle. Otherwise the data may be lost and the MM series may be damaged. 2. Set the DirectHD connection switch to the OFF position. The READY indicator on the connection cradle turns off. 7 3. Hold the stand plate of the connection cradle by your hand, and pull up the MM series out of the connection cradle. 7-15