Sharp PCMM20 User Guide - Page 88
WEP Wired Equivalent
View all Sharp PCMM20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
5. In Internet Protocol (TCP/IP) Properties dialog box, select Use the following IP address and set a unique IP address to 192.168.1.2 through 192.168.1.254 and the Subnet mask to 255.255.255.0; then, click OK. • The IP address of each computer should be unique. • The same subnet mask should be set to the other computer. • The Default gateway can be blank. 6. Click Wireless Networks tab; then, Advanced button in the lower right of the dialog box. Advanced dialog box appears. 7. Select Computer-to-computer (ad hoc) networks only; then, click Close button. 8. Click Add... button in Preferred networks of Wireless Network Connection Properties dialog box. 9. Type a name of the network in Network name (SSID) field of Wireless Network Properties dialog box. Confirm your computer and the other computer(s) are connecting to the 5 same network. 10. Confirm the checkbox of Data encryption (WEP enabled) is checked in Wireless network key (WEP) section. 11. If necessary, check the checkbox of Network Authentication (Shared mode). 12. Clear the checkbox of The key is provided for me automatically. 13. Type a network key in Network key and Confirm network key fields. • The network key to be typed must be equal to that of the other computer. • For available letters or digits, refer to WEP (Wired Equivalent Privacy) Encryption section on page 5-7. 5-10