Singer One Instruction Manual 3 - Page 23
sewing
View all Singer One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
sewing a seam PIN BASTING Pin basting is a time-saver and can be used when you sew easy-to-handle fabric. Use fine pins and place them: . On top of the fabric (never on the -underside in contact with the feed). • At right angles to the stitching line. . Just nipping into the fabric at the stitching line (never extending under both sides of the presser foot). STARTING A SEAM 1. Set stitch length dial for desired length. 2 O 2. With presser foot up, align fabric with appropriate seam guideline on needle plate (as described on the following page). Position needle in fabric about 1.2 cm from the back ed- ge- Reverse-Stitch Push Button 2 3• 3. Lower presser foot. Backstitch to the edge of the fabric for reinforcement by pushing in the reverse-stitch push button located in the center of the stitch length dial. Hold the button until the stitches reach the edge of the fabric and then release for forward stitching. 19