Singer One Instruction Manual 3 - Page 50

disengaged

Get Singer One PDF manuals and user guides View all Singer One manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

CARING FOR YOUR MACHINE (Continued) This machine is designed to use a 15 watt maximum light bulb. Locks Unlocks This machine is designed to use a 15 watt maximum light bulb Bulb Pin Changing the Light Bulb CHANGING THE LIGHT BULB Disconnect power-line plug from electrical supply. Removing the Bulb With thumb and forefinger lower the light bracket. Do not attempt to unscrew bulb. Press it up into socket and at same time turn bulb over in direction shown to unlock bulb pin. Replacing the Bulb Press new bulb into socket with bulb pin entering slot of socket, and turn it over in direction shown to lock bulb in position. Release bracket, and entire assembly will snap back into recess. Raise Presser Foot and Needle Lift Retaining Spring into Slide Plate Grooves Replacing the Slide Plate 46 REPLACING THE SLIDE PLATE You will not have any occasion to remove the slide plate. However, if it should accidentally become disengaged from the machine, it is easily replaced. . Raise presser foot and needle. . Place slide plate in slideway with the front edge close to, but not covering, the retaining spring (as shown in illustration). • With a screwdriver, lift each end of the spring into each of the side grooves on the underside of the slide plate. . Draw the plate gently toward you and fully engage the spring. . Close slide plate.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
CARING
FOR
YOUR
MACHINE
(Continued)
This
machine
is
designed
to
use
a
15
watt
maximum
light
bulb.
Locks
Unlocks
This
machine
is
designed
to
use
a
15
watt
maximum
light
bulb
Bulb
Pin
Changing
the
Light
Bulb
Raise
Presser
Foot
and
Needle
Lift
Retaining
Spring
into
Slide
Plate
Grooves
Replacing
the
Slide
Plate
CHANGING
THE
LIGHT
BULB
Disconnect
power
-line
plug
from
elec-
trical
supply.
Removing
the
Bulb
With
thumb
and
forefinger
lower
the
light
bracket.
Do
not
attempt
to
unscrew
bulb.
Press
it
up
into
socket
and
at
same
time
turn
bulb
over
in
direction
shown
to
unlock
bulb
pin.
Replacing
the
Bulb
Press
new
bulb
into
socket
with
bulb
pin
entering
slot
of
socket,
and
turn
it
over
in
direction
shown
to
lock
bulb
in
position.
Release
bracket,
and
entire
assembly
will
snap
back
into
recess.
REPLACING
THE
SLIDE
PLATE
You
will
not
have
any
occasion
to
remove
the
slide
plate.
However,
if
it
should
accidentally
become
disengaged
from
the
machine,
it
is
easily
replaced.
.
Raise
presser
foot
and
needle.
.
Place
slide
plate
in
slideway
with
the
front
edge
close
to,
but
not
covering,
the
retaining
spring
(as
shown
in
illu-
stration).
•
With
a
screwdriver,
lift
each
end
of
the
spring
into
each
of
the
side
grooves
on
the
underside
of
the
slide
plate.
.
Draw
the
plate
gently
toward
you
and
fully
engage
the
spring.
.
Close
slide
plate.
46