Singer One Instruction Manual 3 - Page 31

buttons • Needle Position: . (left) • General Purpose Presser Foot • Feed Cover Plate Flat buttons can be sewn on quickly and easily using the plain zig-zag stitch. The space between the holes in the button determines stitch width settings. For buttons with standard hole spacing, use settings and as shown. For buttons with unusual hole spacing, use setting and increase or decrease the width ( ) as necessary. 1. Attach feed-cover needle plate (see page 7). 2. Set stitch width at and needle position at (left). Position button under foot and lower needle into center of left hole by turning hand wheel toward you. Lower foot. Turn hand wheel toward you until needle rises out of button and is just above the foot. 3. Set stitch width at medium-wide zigzag ( ) setting. Check stitch width by turning hand wheel slowly toward you; the needle should enter the right hole of the button. Take six or more zig-zag stitches to attach button. End on left side. 4. To fasten stitching, return to stitch width and take three or four stitches. Remove feed-cover plate from the general-purpose needle plate when work is completed. MINNINEMiM 27