Sony BDV-IS1000/C Operating Instructions - Page 59
Insert the tabs of the speaker cord, sliding it down along the grooves along
View all Sony BDV-IS1000/C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Getting Started To prevent the transmission by neighbors To prevent the transmission from neighbors, you can identify the unit and the surround amplifier by performing the pairing operation. For details, see "Identifying the unit with a specific S-AIR sub unit (Pairing operation)" (page 92). To use the surround amplifier for the surround back speakers You can enjoy 7.1 surround sound with the surround back speakers by purchasing the additional surround amplifier. To use the surround amplifier for the surround back speakers, connect the surround back speakers (not supplied) to the surround amplifier, set the SURROUND SELECTOR switch to SURROUND BACK, and make the S-AIR setting for the surround amplifier. For details, see "Using an S-AIR Product" (page 89). To attach the cover to the surround amplifier After connecting and setting, you can attach the cover to the surround amplifier for organizing and storing excess speaker cords. 1 Attach the speaker cord cover by sliding it down along the grooves along the edges of the surround amplifier. Speaker cord cover 2 Insert the tabs of the speaker cord holder in the slots of the speaker cord cover, and press it into place. Speaker cord holder Surround amplifier m Note • When detaching, remove the speaker cord holder, then remove the speaker cord cover. To remove the speaker cord holder, slightly press the catch of the holder and lift off. To remove the speaker cord cover, slightly splay open the edges of the cover and slide down. • Do not use excessive force to store the cords. Surround amplifier Grooves Push the speaker cord cover down until you hear a click. Turn the surround amplifier upside down, then store the cords in the speaker cord cover. 59US