Sony BDV-IS1000/C Operating Instructions - Page 90
For details of the POWER / ON LINE, SELECTOR switch of the surround
View all Sony BDV-IS1000/C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Tip • To confirm the current ID, perform Steps 1 to 6 above. When you pair the unit with the S-AIR sub unit (page 92), [(Pairing)] appears beside ID on the display for selecting ID. To set the ID of the surround amplifier 1 Make sure that the SURROUND SELECTOR switch of the surround amplifier is set to SURROUND. 2 Set the S-AIR ID switch of the surround amplifier to match the ID (A, B, or C) of the unit. 3 Press POWER on the surround amplifier. When sound transmission is established, the POWER / ON LINE indicator of the surround amplifier turns green. For details of the POWER / ON LINE indicator, see "To check the transmission status" (page 58). Tip • When you use the additional surround amplifier (optional) with the surround back speakers (optional), set the SURROUND SELECTOR switch to SURROUND BACK. To set the ID of the S-AIR receiver Refer to the operating instructions of the S-AIR receiver. To use multiple S-AIR main units You can use multiple S-AIR main units by setting a different ID for each component. S-AIR main unit (This unit) HDMI S-AIR ID A Other S-AIR main unit ID B ID A ID A S-AIR sub unit S-AIR sub unit ID B S-AIR sub unit 90US