Sony BDV-IS1000/C Operating Instructions - Page 89

External Audio Device Using an S-AIR Product The unit is compatible with the S-AIR function (page 153), which allows sound transmission between S-AIR products. About S-AIR products There are two types of S-AIR product. • S-AIR main unit (this unit): This is for transmitting sound. You can use up to three S-AIR main unit. (The number of usable S-AIR main unit depends on the use environment.) • S-AIR sub unit: This is for receiving sound. - Surround amplifier: You can enjoy surround speaker sound wirelessly. - S-AIR receiver: You can enjoy system sound in another room. Room A S-AIR main unit HDMI S-AIR S-AIR sub unit (surround amplifier) Room B S-AIR sub unit (S-AIR receiver) (not supplied) Note • You cannot operate this function if you do not insert the wireless transceiver in the unit correctly (page 54). Establishing sound transmission between the unit and S-AIR sub unit (ID setting) For the surround amplifier For the S-AIR receiver Simply by matching the ID of the unit and the S-AIR sub unit, you can establish sound transmission. To set the ID of the unit 1 Press "/1. The system turns on. 2 Press HOME. The home menu appears on the TV screen. 3 Press C/c to select [Setup]. 4 Press X/x to select [System Settings], then press . 5 Press X/x to select [S-AIR ID], then press . 6 Press X/x to select the desired ID, then press . You can select any ID (A, B, or C). The confirmation display appears, then disappears automatically. 7 Set the S-AIR sub unit to the same ID. Sound transmission is established as follows (example): S-AIR main unit (This unit) HDMI S-AIR ID A ID A S-AIR sub unit ID A S-AIR sub unit 89US