Sony BDV-IS1000/C Operating Instructions - Page 63
To quit the Easy Setup, To recall the Easy Setup Display, Press, Confirm the conclusions of [Auto
View all Sony BDV-IS1000/C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Getting Started 16 Press . [Auto Calibration] starts. The system adjusts the speaker setting automatically. Be quiet during the measurement. Note • Loud test sound is output when [Auto Calibration] starts. You cannot turn the volume down. Give consideration to children and neighbors. • Before [Auto Calibration], install the surround amplifier in the appropriate location. If you install the surround amplifier in an improper location, such as another room, proper measurement will not be obtained. • Avoid being in the measurement area and making noise during the measurement (which takes about 1 minute), as it may interfere with measurement. • When you use the surround back speakers with the optional surround amplifier, install the speakers in appropriate location and turn the surround amplifier on. 17 Confirm the conclusions of [Auto Calibration]. The conclusions appear on the TV screen. Press C/c to change the page. The first page shows the distance of speakers. The second page shows the level of speakers. If the conclusions are ok, unplug the calibration mic and press X/x to select [OK]. Note • The environment of the room in which the system is installed may affect measurements. • If measurement fails, follow the message then retry [Auto Calibration]. 18 Press . Easy Setup is finished. All connections and setup operations are complete. To quit the Easy Setup Press HOME in any Step. Tip • If you change the position of the speakers, reset the speaker settings. See "Calibrating the Appropriate Settings Automatically" (page 98) and "Setting the Speakers" (page 100). • If you want to change any of the settings, see "Settings and Adjustments" (page 107). To recall the Easy Setup Display 1 Press HOME. The home menu appears on the TV screen. 2 Press C/c to select [Setup]. 3 Press X/x to select [Easy Setup], then press . 4 Press C/c to select [Start], then press . The Easy Setup display appears. 63US